Advertisement
Available languages
Available languages
Quick Links
H-1222, H-2484
96" PACKING TABLES
TOOLS NEEDED
Phillips Head
7/16" Wrench
Screwdriver
Flat Head
Screwdriver
Hardware Kit
1/4"-20 x 5/8" Bolt x 20
Lock Washer x 20
Locking Tab x 6
#
DESCRIPTION
1
Adjustable Foot
2
Leg
3
Stringer
4
Lower Shelf
5
Tabletop
LEGS AND FRAME ASSEMBLY
1.
Insert adjustable feet (1) into legs (2) and slide into
place at desired height.
NOTE: If desired, insert locking tabs through
legs and adjustable feet to lock feet into place.
2. Place legs (2) in upright position. Legs should be
placed approximately 45" apart.
PAGE 1 OF 6
1-800-295-5510
uline.com
3/8" Wrench
10 mm Wrench
(For Non-Steel Top Assembly)
1/4"-20 Nut x 20
#14 x 3/4" Wood Screw x 24
QTY
6
3
2
2
1
PARTS
4
2
If you purchased L-Shaped Workstation or
Deluxe Workstation, use instructions packaged
with H-5777 uprights.
ASSEMBLY
3. Attach stringers (3) to table legs using center six
holes in back legs. Fasten with 12 bolts, lock washers
and nuts, but do not fully tighten. (See Figure 1)
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
5
3
1
Figure 1
0125 IH-1222
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for U-Line H-2484
Summary of Contents for U-Line H-2484
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-1222, H-2484 1-800-295-5510 uline.com 96" PACKING TABLES TOOLS NEEDED Phillips Head 7/16" Wrench 3/8" Wrench Screwdriver 10 mm Wrench (For Non-Steel Top Assembly) Flat Head Screwdriver PARTS Hardware Kit 1/4"-20 x 5/8"...
- Page 2 ASSEMBLY CONTINUED 4. Place lower shelves (4) across braces of legs. Attach lower shelves using eight nuts and bolts. Now, fully fasten hardware placed in step 3. (See Figure 2) 5. To attach tabletop (5) to frame assembly, place tabletop on a smooth, non-marring surface with top side facing down.
-
Page 3: Herramientas Necesarias
H-1222, H-2484 800-295-5510 uline.mx MESAS DE TRABAJO DE 96" HERRAMIENTAS NECESARIAS Desarmador Llave de 7/16" Llave de 3/8" de Cruz Llave de 10 mm (Para Ensamblar Cubiertas que no Sean de Acero) Desarmador Plano PARTES Kit de Accesorios 20 Pernos de 1/4"-20 x 5/8"... - Page 4 CONTINUACIÓN DEL ENSAMBLE 4. Coloque las repisas inferiores (4) cruzando los travesaños de los postes. Fije las repisas inferiores utilizando ocho tuercas y pernos. Luego, apriete por completo la tornillería colocada en el paso 3. (Vea Diagrama 2) 5. Para fijar la cubierta (5) al ensamble del armazón, voltee la cubierta hacia abajo sobre una superficie lisa, que no deje marcas.
-
Page 5: Outils Requis
H-1222, H-2484 1 800 295-5510 uline.ca TABLES D'EMBALLAGE DE 96 PO OUTILS REQUIS Tournevis Clé de 7/16 po Clé de 3/8 po cruciforme Clé de 10 mm (pour le montage de dessus de table autre qu'en acier) Tournevis à tête plate PIÈCES... - Page 6 MONTAGE SUITE 4. Placez les tablettes inférieures (4) sur les entretoises des pieds, et fixez-les à l'aide de huit écrous et boulons. Ensuite, serrez complètement les pièces installées à l'étape 3. (Voir Figure 2) 5. Pour fixer le dessus de table (5) à l'ensemble du cadre, placez-le sur une surface lisse et non marquante, côté...
Need help?
Do you have a question about the H-2484 and is the answer not in the manual?
Questions and answers