Advertisement
Quick Links
H-2489
1-800-295-5510
uline.com
16 PERSON LOCKER
TOOLS NEEdEd
11/32" Nut Driver (included)
WARNING! Some parts may have sharp
edges. Care must be taken when handling
various pieces to avoid injury. For your safety,
wear a pair of work gloves when assembling.
PAGE 1 OF 5
0410 IH-2489
Advertisement
Related Manuals for U-Line H-2489
Summary of Contents for U-Line H-2489
- Page 1 H-2489 1-800-295-5510 uline.com 16 PERSON LOCKER TOOLS NEEdEd 11/32" Nut Driver (included) WARNING! Some parts may have sharp edges. Care must be taken when handling various pieces to avoid injury. For your safety, wear a pair of work gloves when assembling.
-
Page 2: Vertical Assembly
PARTS VERTICAL ASSEmBLy HORIzONTAL ASSEmBLy dESCRIPTION QTy. dESCRIPTION QTy. Back 10 Push Plugs Left Side 11 Finger Pull Rear Leg 12 Bottom for Horizontal Section Shelf 13 Sides for Horizontal Section Top/Bottom 14 Back Panel for Horizontal Section Right Side 15 Door Frame Assembly for Horizontal Section Door Frame Assembly 16 Locker Door... - Page 3 ASSEmbLy INSTRuCTIONS NOTE: do not tighten bolts until unit is completely assembled. VERTICAL ASSEmBLy 1. Locate and separate the left and right hand sides (2 & 6). Identify the top of each panel. The top of each panel has three holes instead of one. 2.
- Page 4 ASSEmbLy CONTINuEd 6. Insert rear legs ( 3 ) into the corner between the bottom and the side. Bolt the leg to the side using two bolts and nuts per leg. (See Figure 4) 7. Place door and frame assemblies (7 & 8) over the locker body.
- Page 5 ASSEmbLy CONTINuEd 3. Place each door and frame assembly (15 & 16) over each locker frame. make certain the body sides are inside the frames, not between the frames. Attach top to frame header and bottom to frame sill (one bolt each). Bolt the side of the door frame (15) and side for horizontal section (13) together, from left to right (2 bolts each).