Page 1
Roborock H5 Cordless Stick Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
Page 2
English Français Deutsch Italiano Español Nederlands 44 Polski Norsk Svenska...
Contents 04 Safety Information 05 Product Introduction 05 Installation 06 Instructions for Use 07 Routine Maintenance 08 Basic Parameters 09 Common Issues 09 Troubleshooting 10 EU Declaration of Conformity 10 WEEE Information 10 Warranty Information...
Safety Information power supply, and place it in a cool and dry place. substances (such as non-extinguished cigarette • Make sure that you recharge it once every three butts). Restrictions months to avoid the battery to overdischarge. • Do not vacuum any hard or pointy objects (such •...
Product Introduction Installation Charging Dock (Optional) *It is recommended that you let specialists install the charging dock. Use protective clothing, safety goggles, and Main Unit Cleaning Heads other protective equipment when necessary. B3-1—To attach the positioning sticker: —Power Disposable Dust Bag (Optional) Attach the positioning sticker onto •...
Instructions for Use 5. The vacuum cleaner is only suitable for 2. Before cleaning the roller, make sure that vacuuming small amounts of fine dust, the cleaning head has been detached such as flour and construction dust. from the main unit. Avoid accidentally Charging 6.
Routine Maintenance D2-5—Push the no filter protection lock on D1-4—Use a dry cloth or tissue to wipe off the dust inside the dustbin and the multi-cyclone assembly into the attach the bottom cover of the slot. Place the filter into the right side Product Maintenance of the multi-cyclone assembly and dustbin into place.
Basic Parameters Cleaning Head Rollers D5-2—Take out the roller from the motorized mini-brush. Inspect and clean the cleaning head rollers Vacuum Cleaner D5-3—Clean and wash the roller. periodically to ensure product performance. D5-4—Place the roller vertically and dry Before removing a roller, ensure that the Model H8D1A it for at least 24 hours to ensure...
Common Issues The vacuum cleaner will stop working when it malfunctions. Please refer to the table below to find the cause and solution to the issue. If the issue persists, please contact customer service for repair. Issue Solution • The motor of the cleaning head may be overheated. Wait until the temperature returns to Electric cleaning head is not functioning normal before use.
EU Declaration of Conformity We Shenzhen Roborock Innovation Technology Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: https://global.roborock.com/pages/compliance...
Need help?
Do you have a question about the H5 and is the answer not in the manual?
Questions and answers