Printer Properties Settings - Ricoh Priport DX 4640PD Operating Instructions Manual

PostScript3 printer driver - Setting Up for Printing
B
Select the printer you want to use in the [Select Printer] box.
Note
❒ Under Windows XP and Windows Server 2003, click [Preference] to open
1
the Printer Preference window.
C
Make any setting you require, and then click [Print] to start printing.

Printer Properties Settings

Make the settings for this printer, such as the memory capacity installed in this
printer, the paper size for the trays, and the availability of options.
Note
❒ In this section, the setting items peculiar to this printer are explained. For oth-
er setting items, see the documentation that comes with Windows 2000/XP
and Windows Server 2003 or Help.
[Device Settings] tab
When the item to be set is clicked, a drop down list will appear on the right. Click
the list to open it and make a setting.
❖ [Form To Tray Assignment]
Paper sizes can be assigned to every tray. Normally, they are not set. You can
also select "Not Available".
❖ [Font Substitution Table]
Edit the TrueType Font Substitution Table.
• Font Substitution
You can set whether to replace fonts that are on the Font Substitution Table
with any other fonts. Replacing a TrueType Font and the printer font can
speed up printing.
A When a "n" is displayed on the left side of [Font Substitution Table], click
it and the items below will be displayed. A list of the fonts installed on
the computer will be displayed.
B Click the name of the TrueType font to be replaced.
A drop down list will be displayed on the right side of the font name.
C Click the name of font to replace the TrueType font from the drop down
menu.
• There may be slight differences between the screen and the printed
output such as the carriage position, when font replacement is per-
formed.
18