Ricoh Priport DX 4640PD Operating Instructions Manual page 12

PostScript3 printer driver - Setting Up for Printing
❖ "Skip Feed"
• Use to make the interval between paper feeds longer, allowing the ink
to dry.
• Use to print on a paper longer than the standard size.
1
Limitation
❒ The maximum length of paper that can be printed using Skip Feed is 460
mm. However, when printing on paper longer than 432 mm, the deliv-
ered paper may fall off the paper delivery end plate. Therefore, you
should hold the paper so that it does not fall off.
❖ "Separate"
When set to "On", classifying will occur whenever the document data
changes.
❖ "Enable short master"
You can select whether to set the length of the master automatically.
❖ "Rotate image"
When set to "180 degrees", the image will be rotated 180 degrees and print-
ed. This is very convenient when printing on envelopes. See p.14 "Printing
onto envelopes"
❖ "Brightness"
The brightness of the whole printed image can be adjusted to one of seven
levels.
Note
❒ The brightness of the color of characters does not change.
❖ "Line Density (lpi)"
You can select the screen ruling (resolution).
❖ "Separate into CMYK"
It is possible to output only the color selected from Cyan, Magenta, Yellow,
and Black. If "Don't Separate" is selected, separation will not be done.
❖ [Installable Options]
Set connected option devices. The following items are installable:
• "LS3000R (LCIT)"
• "LS3000R (LCOT)"
• "Separator"
8