Ricoh Priport DX 4640PD Operating Instructions Manual page 24

PostScript3 printer driver - Setting Up for Printing
❖ [Page Order]
Specify the order in which the pages are printed. When "Front to Back" is
specified, the first page will be printed as the top page. When "Back to Front"
is specified, the first page will be printed as the last page.
1
❖ [Pages Per Sheet:]
Specify the number of pages printed on one sheet of paper. For example, if
"1" is specified, one page will be printed on one sheet. If "2" is specified, two
pages will be printed on one sheet.
[Paper/Quality] tab
Set the paper feed tray to be used and the color.
❖ [Tray Selection]
Specifies a paper feed tray to be used for printing.
Note
❒ Select "Paper Feed Tray" here.
❖ [Color]
Normally, selecting "Color" is recommended.
[Advanced] dialog box
This dialog box is displayed when you click [Advanced...] on the [Paper/Quality] tab
or the [Layout] tab. Here you can set detailed items about the paper size and the
functions of the printer.
❖ [Paper/Output]
❖ "Paper Size"
Select the size of the paper to be printed.
Note
❒ It is possible to set the size of custom paper when selecting "PostScript
Custom Page Size". See p.24 "Printing on custom sized paper".
❖ "Collated"
If you select more than "2" in "Copy Count" , "Collated" will become en-
abled. Make sure to regularly clear the "Collated" check box, because if
"Collated" is not cleared, master making may be done every time a page is
going to be printed.
❖ [Graphic]
❖ "TrueType Font"
TrueType Font can replace printer fonts by following the "Font Substitu-
tion Table" when "Substitute with Device Font" is selected.
20