Other Printing Problems; When You Cannot Print Properly - Ricoh 407773 User Manual

3. Troubleshooting

Other Printing Problems

This section describes likely causes of and possible solutions for problems that can occur when a print
job is performed from a computer.

When You Cannot Print Properly

Problem
The printed image is smudged.
Printed images contain blots or
are patchy.
Printed images contain blots or
are patchy.
66
Cause
Settings for thick paper have not
been configured when printing
on thick paper in the bypass
tray.
The paper is damp.
The printer is not on a level
surface.
Solution
PCL 5c:
On the printer driver's [Paper]
tab, select [Bypass Tray] in the
"Input Tray:" list. Then in the
"Type:" list, select a proper
paper type.
PCL 6/PostScript 3:
On the printer driver's [Detailed
Settings] tab, click [Paper] in
"Menu:", and then select
[Bypass Tray] in the "Input
Tray:" list. Then in the "Paper
Type:" list, select a proper
paper type.
Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 32 "Paper Precautions".
The printer must be placed on a
stable and level surface. Check
the printer environment and
select an appropriate location.
For details about the printer's
environment, see "Install
Location", Operating
Instructions.