Netball Australia Regulations as well as standard bolt-on ring netball post which offers higher load strength. Product Specifications: • Models: Netball Australia Compliant: NS60c, NS60Tc, NS76c, NS76Tc Bolt-On Ring: NS60, NS60T, NS76, NS76T • Height: ➢ NS60c/NS76c/NS60/NS76: Fixed at Senior height of 3.05m...
Page 4
Ground Sleeve Options Height (OD) Australia Compliant NS60 3.05 m 350 Dia x 900 ES60 & EHC60s Deep NS60c 3.05 m NR60 350 Dia x 900 ES60 & EHC60s Deep NS60T 3.05 m 60 & 48 350 Dia x 900 ES60 &...
P a g e Certificate of Compliance: All our products have been structurally designed and are made using structural-grade steel. All the workmanship is completed following the relevant Australian Standards. Our Products comply with the following Australian Standards. 1. AS/NZS 4100:1998 Steel Structures 2.
P a g e 2. NS76 Footing Details Figure 3: NS76 Series Footing Plan with Sleeve Options 13 Alex Fisher Drive, Burleigh Heads, QLD 4220 (Australia) Ph: 1300 851 518 | +61 7 5593 4494 Email: email@playhardsports.com.au | W: www.playhardsports.com.au...
• Insert the netball post into the ground sleeve. • For height-adjustable models (NS60c, NS60Tc, NS76c, NS76Tc), use the integrated lobe knob to set the desired height of either 3.05m (senior height) or 2.4m (junior height). • Model Specific instructions are supplied with each model, please read these instructions in conjunction with the provided instructions.
P a g e • Then, attach the ring to the post using the supplied bolts. • The bolts must be tightened properly. Maintenance: All our Goals are designed to require a minimal level of maintenance. However, it is advisable to do: •...
P a g e Warranty Certificate: When you purchase a Play Hard Sports Equipment product you have the peace of mind in knowing that your product is covered by Play Hard Sports Equipment’s 5-year manufacturer’s warranty against faulty workmanship and materials. The warranty covers damage or failure of the product during normal intended use.
Need help?
Do you have a question about the NS60c and is the answer not in the manual?
Questions and answers