Table of Contents
Advertisement
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an
electrical outlet that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an
extension cord. If a 2-prong wall receptacle is the only available
outlet, it is the personal responsibility of the consumer to have it
replaced with a properly grounded 3-prong wall receptacle
installed by a qualified electrician.
See the INSTALLATION
INSTRUCTIONS
packaged with this
cooktop for complete installation and grounding instructions.
This appliance is equipped with a 3-prong
grounding plug for your protection against shock hazard and
should be plugged directly into a properly grounded receptacle.
DO NOT cut or remove the grounding prong from this plug.
Liquefied
This model can be used with Natural Gas and Propane Gas. {t is
shipped from the factory for use with natural gas.
{f you wish to convert your cooktop for use with propane gas, use
the instructions
in the envelope
attached,
marked
"FOR LP/
PROPANE GAS CONVERSION".
Grounding
type wall
receptacl_
supply cord with
3-prong grounding plug
Avoid fire hazard or electrical
shock. DO NOT use an adapter plug, an extension
cord, or remove grounding prong from electrical
power cord. Failure to follow this warning can
cause serious injury, fire or death.
Petroleum (Propane) Gas Conversion
Severe electrical shock, or damage
to the cooktop,
may occur if the cooktop
is not '_}'
converted by a qualified installer or electrician.
To avoid serious injury, any
.............
additions, changes or conversions required in
:':
order for this appliance to satisfactorily
meet the
.......
application needs must be made by a qualified
service agent.
Only a qualified service agent should perform the L. P.
conversion. Contact the local gas provider for conversion. An L.
P. Conversion Kit is supplied with this range and is located on
the main back of the range. The kit contains installation
instructions which must be read before and followed carefully
when installing the kit.
Before Setting Surface Controls
Locations
of the Gas Surface
Burners
The SIMMER burner is best used for simmering delicate sauces, etc. This
burner is located at the right rear burner position on the 30" cooktop model
and at the center rear burner position on the 36" cooktop model.
The STANDARD
sized burners are used for most surface cooking needs.
These burners are located at the left front and left rear positions on the
cooktop (and there is one more standard burner located at the right rear
position on the 36" cooktop models).
The POWER burner is best used for bringing large quantities of
liquid rapidly up to temperature or when preparing larger quantities
of food. This burner is located at the right front position on the
cooktop.
The BRIDGE burner is best suited when using rectangular or long
shaped cookware. The left rear and left middle are combined and
controlled by the same control knob. The left front burner may also
be added for a total of 3 burners.
Advertisement
Table of Contents
