Product Record; Serial Plate Location; Grounding Instructions; Liquefied Petroleum (Propane) Gas Conversion - Kenmore Gas cooktop Use & Care Manual

Gas cooktop
Hide thumbs


Table of Contents

Product Record

In this space below, record the date of purchase, model and serial
number of your product. You will find the model and serial number
printed on the serial plate. This serial plate is located under the
cooktop. See bottom of this page for the serial plate location.
Model No. ___________________________________________
Serial No. ____________________________________________
Date of purchase _____________________________________
Save these instructions and your sales receipt for future reference.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas appliance is designed to allow for
conversion to Liquefied Petroleum (L.P.) Gas.
Only a qualified service agent should perform the L. P.
conversion. Contact the local gas provider for conversion.
The L. P. Conversion Kit is supplied with this unit and is
located in the literature package. The kit contains installation

Grounding Instructions

For personal safety, the cooktop must be properly grounded. For maximum
safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a properly
grounded 3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions.
This appliance is equipped with a 3-prong
grounding plug for your protection against shock hazard
and should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding prong from
this plug.

Serial Plate Location

Please see the illustration for exact location. Remember to record
the serial number for future reference.
Serial plate is
located under the
burner box.
instructions which must be read before and followed
carefully when installing the kit.
To avoid serious injury, any additions,
changes or conversions required in order for this appliance to
satisfactorily meet the application needs must be made by a
qualified service agent.
type wall
Avoid fire hazard or electrical shock. DO
NOT use an adapter plug, an extension cord, or remove
grounding prong from electrical power cord. Failure to follow
this warning can cause serious injury, fire or death.
Do not, under any
cut, remove,
or bypass the
grounding prong.
Power supply
cord with 3-prong
grounding plug


Table of Contents

  Also See for Kenmore Gas cooktop

Table of Contents