BLINDS2GO Click2Go Installation Manual

Roman blinds

Download this manual

Installation Guide

Roman Blinds

If you upgraded to Click2Go, please skip to page 3.

Fitting the brackets (not applicable for Click2Go Roman Blinds)

The brackets offer two methods of installation:

Top-Fixing

Face-Fixing

5cm

Note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly

distributed across the width.

Fitting the blind (not applicable for Click2Go Roman Blinds)

Hook the front lip of the headrail onto the front 'hook' of the bracket. Then push the rail against the bracket and raise the back up

until the rear lip of the headrail snaps onto the rear hook of the bracket.

Page 1 of 4

Need help?

Do you have a question about the Click2Go and is the answer not in the manual?

Page 1 Installation Guide Roman Blinds If you upgraded to Click2Go, please skip to page 3. Fitting the brackets (not applicable for Click2Go Roman Blinds) The brackets offer two methods of installation: Top-Fixing Face-Fixing Note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly distributed across the width.
Page 2 If you have a standard or SmartView Roman Blind, please skip to page 4. Fitting a Click2Go Roman Blind The fabric is attached to the front of the rail with Velcro. Peel the corner away from the end opposite to the controls, until you can access the tension lever under the rail.
Page 3 Installation Guide Roman Blinds Child Safety Safety cleat (not applicable for SmartView Roman Blinds) Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of the reach of young children.
Page 4 Pull down on the front part of the chain to lower the blind, and pull down on the rear part of the chain to raise the blind. Taking the blind down Click2Go Blinds Standard & SmartView Blinds Peel the fabric away from the rail to expose the lever. Using a...