IKA ICC control Operating Instructions Manual page 4

We declare under our sole responsibility that this product corresponds to the directives 2014/35/EU, 2006/42/EC, 2014/30/
EU and 2011/65/EU and conforms with the following standards or normative documents: EN 61010-1, EN 61010-2-010,
EN 61326-1, EN 60529, EN ISO 12100 and DIN 12876-1, -2, -3�
A copy of the complete declaration of conformity or further declarations of conformity can be requested at sales@ika�com�
DANGER
WARNING
CAUTION
NOTICE
WARNING
General information:
• Read the operating instructions completely before
starting up and follow the safety instructions.
• Keep the operating instructions in a place where it can be
accessed by everyone�
• Ensure that only trained staff work with the device�
• Follow the safety instructions, guidelines, occupational
health, safety and accident prevention regulations�
• Set up the device in a spacious area on an even, stable,
clean, non-slip, dry and fireproof surface�
DANGER
With substances capable of forming an explosive mixture,
appropriate safety measures must be applied, e�g� work-
ing under a fume hood�
To avoid body injury and property damage, observe the
relevant safety and accident prevention measures when
processing hazardous materials�
EU Declaration of Conformity
Explication of warning symbols
Indicates an imminently hazardous situation, which, if not avoided, will result in death, serious
injury�
Indicates a potentially hazardous situation, which, if not avoided, can result in death, serious
injury�
Indicates a potentially hazardous situation, which, if not avoided, can result in injury�
Indicates practices which, if not avoided, can result in equipment damage�
Reference to exposure to a hot surface!
Hot surface!
Safety instructions
Do not use the device in explo-
sive atmospheres, it is not EX-
protected�
• Protect the device and accessories from bumping and im-
pacting�
• Check the device and accessories for damage before each
use� Do not use damaged components�
• Safe operation is only guaranteed with the accessories de-
scribed in the "Accessories" section�
• The device must only be operated with the original mains
cord�
• The socket for the mains cord must be easily accessible�
• Socket must be earthed (protective ground contact)�
• The voltage stated on the type plate must correspond to
the mains voltage�
• The device can only be disconnected from the mains sup-
ply by pulling out the mains plug or the connector plug�
• Disconnect the mains plug before attaching or changing
any accessories�
• Disconnect the mains plug before cleaning, maintenance
and transportation of the unit�
• The device must only be opened by trained specialists,
even during repair� The device must be unplugged from
the power supply before opening� Live parts inside the
device may still be live for some time after unplugging
from the power supply�
4