Braeburn 8205 Setup Manual

Wi-Fi Setup Guide
1
Wire and Install Thermostat
• Properly wire and configure thermostat.
Refer to the Installer Guide.
• Refer to the User Manual for programming
and maintenance.
Requires common (C) wire on Heat
NOTE:
Pump, Heat Only or Cool Only Systems
Helpful videos can be found at
www.braeburnonline.com and in the
BlueLink Smart Connect
2
Set-Up for Connection
Before beginning setup you will need to:
• Know your Wi-Fi network name and password
• Have a valid e-mail address
• Locate your thermostat serial number
• Get the FREE app for iOS or Android
NOTE: The initial thermostat connection must
be performed from an Apple iOS or Android
mobile device or tablet. Once connected, you can
access the app on a desktop PC by visiting
bluelinksmartconnect.com/bluelink.
3
Login and Register
3.1
Open the BlueLink Smart Connect
App. Select REGISTER and enter
a valid e-mail address.
3.2
Enter the thermostat serial number.
You can locate this number on the
back of the thermostat.
NOTE: If you removed the thermostat to
locate the serial number, make sure to
reconnect it before selecting ENTER.
3.3
Complete the remaining registration
screens. The application will walk
you through the Wi-Fi connection
process.
Model 8205
Universal Smart Wi-Fi
Thermostat
Leave this Setup Guide
with thermostat.
App.
®
TM
TM
8205-105-02
Serial number
location
®
®