Install Air Conditioner In New Wall Sleeve - Whirlpool 1187680 Use And Care Manual

5. Using the grille as a template, mark location of 2 holes on the
top of the wall sleeve. Drill
A. Drill " holes into the wall sleeve.
6. Attach the rear grille using #8 - 32 self-tapping screws
(provided).
Wall sleeve dimensions: 25.5" x 15.25" x 17.5" (64.8 cm x
38.7 cm x 44.5 cm) or 25 " x 15
39.45 cm x 42.47 cm)
1. Remove the existing grille from the wall sleeve.
2. Remove all debris from inside the wall sleeve.
3. Remove the tabs on the sides of the grille (provided) with your
new air conditioner by bending the tabs back and forth using
a pair of pliers.
A
A. Remove the tabs using a pair of pliers.
4. Insert new grille into sleeve.
NOTE: Make sure that the word "Top" is readable from inside
the room.
6
" holes into the wall sleeve.
A
" x 16 " (65.7 cm x
5. Secure the grille to the wall sleeve by using the screws
(provided) in the same locations as the screws in the grille
that was removed.
Insert grille and attach with screws (provided).
Wall sleeve dimensions: 27" x 16.75" (68.58 cm x
42.55 cm) or greater
These sleeves require a larger rear grille and installation parts
than the ones provided with this air conditioner. See your local
supplier for a kit to fit this size wall sleeve.
NOTE: If you install your new air condtioner into this size wall
sleeve without using the kit, you will cause damage to your new
air conditioner and the warranty will be void.

Install Air Conditioner in New Wall Sleeve

A
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
Install the new grille that came with your air conditioner or
new wall sleeve.
NOTE: If this grille is not installed in the wall sleeve, your air
conditioner will not operate correctly and the warranty will be
void.
Handle air conditioner gently.
WARNING