1
3
6 Align the drive screw holes with the screws projecting up on the heat sink holder.
7 Firmly press on the blue tab on each side of the drive until you hear a click.
8 Replace the computer cover ("Replacing the Computer Cover" on page 96).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
9 Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
80
Removing and Installing Parts
tabs (2)
hard drive holder on the chassis
1
2
2
hard drive
4
hard drive plastic latch
3
4