Dell XPS 210 Owner's Manual page 51

Light Pattern Problem Description
A possible expansion card failure has
occurred.
The system is operating in the quick
resume mode. For additional information
see "Using Intel® Viiv™ Quick Resume
Technology (Optional)" on page 30.
Another failure has occurred.
Suggested Resolution
1
Determine if a conflict exists by
removing an expansion card (not a
graphics card) and restarting the
computer (see "Cards" on page 70).
2
If the problem persists, reinstall the
card that you removed, then remove a
different card and restart the computer.
3
Repeat this process for each expansion
card installed. If the computer starts
normally, troubleshoot the last card
removed from the computer for
resource conflicts (see "Resolving
Software and Hardware
Incompatibilities" on page 56).
4
If the problem persists, contact Dell
(see "Contacting Dell" on page 112).
• Press the power button.
• Move the mouse.
• Press any key on the keyboard.
• Press any key on the optional MCE
remote control.
• Ensure that all hard drive and
CD/DVD drive cables are properly
connected to the system board (see
"System Board Components" on
page 65).
• If there is an error message on your
screen identifying a problem with a
device (such as the floppy drive or hard
drive), check the device to make sure it
is functioning properly.
• If the operating system is attempting
to boot from a device (such as the
floppy drive or hard drive), check
system setup (see "System Setup" on
page 101) to make sure the boot
sequence is correct for the devices
installed on your computer.
• If the problem persists, contact Dell
(see "Contacting Dell" on page 112).
Troubleshooting Tools
51