3 Connect the power cable and hard-drive or SATA cable to the drive.
1
power cable
3
hard drive cable or serial ATA data cable
4 Check all connectors to be certain that they are properly cabled and firmly seated.
5 Gently slide the drive into the open bay until the hard drive plastic latch attaches to the hard drive
holder on the chassis.
NOTE:
The plastic latch fits into a small rectangular hole on the chassis. The rectangular hole is larger than the
other small holes on the back of the chassis.
2
1
2
4
3
4
hard drive plastic latch
open bay
Removing and Installing Parts
79