Advertisement
Quick Links
Advertisement
Related Manuals for Hilti TE 60-AVR (04)
Summary of Contents for Hilti TE 60-AVR (04)
- Page 1 TE 60-AVR (04) TE 60-ATC/AVR (04) English...
- Page 8 • The accompanying documentation corresponds to the current state of the art at the time of printing. Please always check for the latest version on the product’s page on Hilti’s website. To do this, follow the link or scan the QR code in this documentation, marked with the symbol •...
- Page 9 Item reference numbers are used in the overview illustration and refer to the numbers used in the key in the product overview section. This symbol is intended to draw your special attention to certain points for handling the product. Product-dependent symbols Symbols on the product The following symbols are used on the product: Drilling without hammering action...
- Page 10 ▶ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. ▶ If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
- Page 11 Service ▶ Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Hammer safety warnings Safety instructions for all operations ▶ Wear ear protectors. Exposure to noise can cause hearing loss. ▶...
- Page 12 Undercut anchors The product is suitable for setting undercut anchors. Use only suitable setting tools. Detailed information on this topic can be obtained at your local Hilti Center. The product is equipped with the ATC (Active Torque Control) quick-acting electronic cut-out.
- Page 13 Service indicator status Status Meaning The service indicator lights. End of service interval – servicing is due. The service indicator blinks. Have the combihammer repaired by Hilti Ser- vice. Items supplied Combihammer, side handle, operating instructions. Technical data Combihammer When powered by a generator or transformer, the generator or transformer’s power output must be at least twice the rated input power shown on the rating plate of the power tool.
- Page 14 An accurate estimation of exposure should also take into account the times when the power tool is switched off, or when it is running but not actually being used for a job. This can significantly reduce exposure over the total working period. Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work patterns.
- Page 15 1.Apply a little grease to the connection end of the accessory tool. ▶ Use only genuine Hilti grease. Using the wrong grease can result in damage to the product. 2.Push the accessory tool into the tool holder as far as it will go (until it engages).
- Page 16 • After cleaning and maintenance, fit all guards or protective devices and check that they function correctly. To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Store or online at: www.hilti.group.
- Page 17 • Check electric tools or appliances for damage after long periods of transport or storage. Troubleshooting If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service. Trouble or fault Possible cause Action to be taken ▶...
- Page 18 Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 19 The manufacturer declares, on his sole responsibility, that the product described here complies with the applicable legislation and standards. The technical documentation is filed here: Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany Product information Combihammer...
- Page 20 The manufacturer declares, on his sole responsibility, that the product described here complies with the applicable legislation and standards. The technical documentation is filed here: Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany Product information Combihammer...
- Page 21 2134960 *2134960*...
- Page 22 2134960 *2134960*...
- Page 23 2134960 *2134960*...
- Page 24 *2134960* 2134960 Hilti = registered trademark of Hilti Corp., Schaan Pos. 2 | 20240710...
Need help?
Do you have a question about the TE 60-AVR (04) and is the answer not in the manual?
Questions and answers