Table of Contents
Advertisement
Quick start
1
Ensure the unit is fully charged.
2
Assemble the nozzle, and hose as described
below.
3
Ensure you have the filter installed correctly.
4
Switch on the unit by sliding the on/off switch
downwards.
Accessories
1
Fit the hose
to the cleaner by inserting the
hose end (short end) into the hose inlet
2
When removing push the release button in
and pull the hose out.
3
Attach the crevice tool
nozzle
(for those awkward places,
behind radiators etc). Twist slightly
to tighten the connection.
.
release
button
to the hose
4
Attach the upholstery/wet pick up attachment
to the hose.
5
Attach the brush
pelmets and delicate objects etc.
Carrying strap
1
Insert the strap end into the end hole on both
sides of the unit. Fasten the supplied screws
with a 'cross' head screwdriver.
4
for hard surfaces,
Advertisement
Table of Contents
