Quick Start - Morphy Richards POD CYCLONE VACUUM CLEANER - REV 1 Manual

POD CYCLONE VC73115M REV 1

Quick start

1 Assemble the nozzle, extension tubes
and hose as shown A.
2 Pull out the mains cable to it's full length
and plug into the mains supply.
3 Switch on by pressing the foot pedal ‹.
Accessories
1 Fit the hose to the cleaner by inserting
the hose end into the hose inlet ⁄.
When removing, press the button on the
top and pull.
2 Attach the tubes to the handle end of the
hose.
The hose handle features an airflow
regulator „ which allows suction to be
reduced as required.
3 Attach the wheeled floor nozzle È to the
tubes. The nozzle features an adjustment
pedal, that can be adjusted to suit the
floor surface. B
• Brushes down
for hard floors.
• Brushes
retracted for
carpets and
rugs.
The crevice tool with brush Ë is ideal for
use in awkward places and for curtains and
upholstery.
16/12/03 1:21 pm
B
Page 4
Controls
Power
The on/off control is operated by the foot
pedal ‹.
Suction control
Suction can be controlled using the
airflow regulator on the handle „ closed
for maximum suction, open for reduced
suction.
Automatic cable rewind
After use, unplug and press the carry
handle fully down ¤ to retract the cable.
WARNING: When using the cable
rewind, always hold the plug as the cable
will rewind quickly.
4