Quick start
1 Assemble the desired accessories as
shown on page 5.
2 Unwind the cable to it's full length and plug
in to the mains supply.
3 Switch on by pressing the on/off power
switch.
Accessories
1 Fit the hose to the cleaner by first inserting
the hose adapter
9
Attach the hose to the hose adapter. A
2 The brush nozzle
12
can be fitted directly into the hose inlet.
without the need for hose adapter. B
To store the brush nozzle and crevice
nozzle, insert brush nozzle vertically into
clip then slide crevice nozzle horizontaly
until it clips into place. C
3 All the other accessories attach to the
hose. The extension tubes
attached to the hose using the hose handle
for floor cleaning or extra reach.
to the hose inlet.
3
and crevice nozzle
10
can be
18
Carry strap
11
Your vacuum cleaner comes with a carry strap
for added convienience.
The carry strap can be clipped on the two
hooks
one at rear of the handle and the
2
other in front of the on/off switch.
Floor Nozzle
19
The floor nozzle adjusts to suit either carpet
or hard floor.D
Press down on the symbol for hard floors or
press down on the symbol to retract the
brushes for use on the carpet.
Turbo Nozzle
20
The turbo nozzle is ideal for use on carpets or
upholstery to remove stubborn pet hair.
Attach to the turbo nozzle directly to the hose
handle
to remove stuborn pet hairs from
17
upholstery or small areas of carpet. (Turbo
nozzle is designed for small areas only for
example pet beds and chairs)
WARNING Do not attach the turbo nozzle
to the extension tubes.
4
(pets models only)