Cleaning And Replacing The Filters; Care And Maintenance - Morphy Richards IB70240 Instructions Manual

Cylinder cleaner
Table of Contents

Advertisement

8598 Aztec ib
05/08/2003
Cleaning and
replacing the filters
Motor protection filter
This is in the dustbag compartment. Clean
it everytime you change/empty the dustbag
and replace it after approximately 5 dustbag
changes.
1 Lift out the red filter as shown H and
clean by tapping.
2 Replace the filter by locating it into the slot
and clipping it back I.
Note: The filter safety catch Á prevents
the cover being closed unless a motor
protection filter is fitted.
6
10:23
Page 6
Exhaust filter
This is located on top of the motor
housing J. Clean it everytime you
change/empty the dustbag and replace it
after approximately 5 dustbag changes. To
Ê
remove, lift it from its location and shake to
clean or replace.
H
Care and
maintenance
ALWAYS DISCONNECT FROM THE
MAINS BEFORE WORKING ON OR
I
CLEANING YOUR CLEANER.
Your cleaner is manufactured to withstand
normal day-to-day use, but an occasional
Á
wipe over with a damp cloth will help
maintain its good looks.
Abrasive cleaners should not be used.
Ë
J
Ë

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aztec 70240

Table of Contents