cecotec POWER RETROGREEN 1200MAX Instruction Manual page 4

ENGLISH
Use
1. Attach the balloon whisk to the coupling unit.
2. Attach the coupling unit to the motor unit.
3. Put the ingredients in a large and deep bowl.
4. Fully immerse the balloon whisk in the ingredients. To avoid splashes, start the process at
normal speed.
Food chopper
- The chopper is designed to chop foods such as nuts, meat, onions, cured cheese, hard-
boiled eggs, garlic, spices, stale bread, etc.
- Never let the motor run more than 3 times in a row, let it rest for half an hour.
- Remove any bone inside the ingredients to be processed and cut food into pieces with 1-2
cm thickness.
Use
Warning: the blades are very sharp. Use extreme care when handling the blades unit. Take
special care when removing the blades unit from the chopper container, when emptying the
chopper container and during cleaning.
1. Insert the blades into the chopper container.
2. Then, put the ingredients into the container.
3. Place the chopper coupling in the container.
4. Attach the motor unit to the chopper coupling and turn it until it locks into place.
5. Press the Normal speed or the Turbo speed button to switch on the appliance.
- If the ingredients stick to the wall of the container, remove them by adding liquid or using a
spatula. Always allow the appliance to cool down after mincing meat.
Comparison table
Food type
Meat (20 mm cubes)
Vegetables
Nuts
Garlic
Bread
POWER RETRO 1200MAX / POWER RETRO 1200MAX CREAM&CRUSH
Maximum amount (g)
250
100
150
150
80
Time (s)
Less than 20
10
15
15
10