Advertisement
Quick Links
Introduction
The ZiLOG Z8 Encore!
Series MCU emulation with a trace and event system for program debugging using ZDS II
development tools.
This user manual tells you how to:
1. Install ZDS II software.
2. Configure the 64K Series ICE for connection to your PC.
3. Connect the 64K Series ICE to a target board using a 64K Series MCU package
adapter.
4. Run a demonstration program to verify proper operation and illustrate basic operation
of the trace and event system.
Kit Contents
•
One (1) Z8 Encore!
•
One (1) DB9-to-DB9 serial I/O cable.
•
One (1) CAT-5 crossover cable.
•
One (1) 40-pin PDIP, 44-pin LQFP, 44-pin PLCC, 64-pin LQFP, 68-pin PLCC, or 80-
pin QFP package adapter (depending on the emulator model you ordered).
•
One (1) target POD with ribbon cables to connect the 64K Series ICE to the package
adapter that came with your kit. (To obtain adapters for other 64K Series MCU pack-
ages, refer to "Adapter Ordering Information" on page 15.)
•
Two (2) 5V AC power supply and adapters
•
One (1) ZDS II Installation CD-ROM
Requirements
Table 1 lists the PC requirements for running ZDS II.
ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126
Telephone: 408.558.8500 • Fax: 408.558.8300 •
Z8 Encore!
In-Circuit Emulator
UM016802-0504
®
64K Series In-Circuit Emulator (ICE) provides Z8 Encore! 64K
®
64K Series In-Circuit Emulator.
®
64K Series
www.ZiLOG.com
User Manual
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ZiLOG Encore! 64K Series In-Circuit Emulator
Summary of Contents for ZiLOG Encore! 64K Series In-Circuit Emulator
- Page 1 Two (2) 5V AC power supply and adapters • One (1) ZDS II Installation CD-ROM Requirements Table 1 lists the PC requirements for running ZDS II. ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126 Telephone: 408.558.8500 • Fax: 408.558.8300 • www.ZiLOG.com...
-
Page 2: Install The Software
® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 2 Table 1. ZDS II System Requirements Recommended Configuration Minimum Configuration • PC running MS Windows XP, SP1 • PC running MS Windows 98SE/WinNT 4.0– • Pentium III/500 MHz processor SP6/Win2000–SP3/WinXP–SP1 •... - Page 3 (see Figure 5). If the ICE Fail LED illuminates instead, there is a problem with the unit. Contact ZiLOG support at http://www.zilog.com/ for a replacement unit. 7. Connect a 5 VDC power supply to the Z8 Encore! development board.
- Page 4 ® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 4 Target POD and Adapter Assembly Figure 3. Connecting the 64K Series ICE to the Target POD and Adapter Assembly (Typical Connection Shown) Pin 1 Pin 1 Unit Front Figure 4. 64K Series ICE Top View UM016802-0504 Preliminary...
-
Page 5: Configure The Hardware
® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 5 ICE Run ICE Fail J11 and J14 J10 and J2 Figure 5. 64K Series ICE Front-Panel Configure the Hardware Configuring the 64K Series ICE consists of selecting emulator jumper options and setting up Ethernet communications between the emulator and your PC. - Page 6 ® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 6 Changing the PC’s Settings to Match the 64K Series ICE After completing the following steps to change the PC’s Ethernet settings, proceed to Run- ning a Sample Project on page 10. Note: The following instructions are for MS Windows XP.
- Page 7 ® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 7 2. In the panel labeled LAN or High-Speed Internet, double-click the Local Area Con- nection icon. The Local Area Connection Status dialog box appears (Figure 7). Figure 7. The Local Area Connection Status Dialog 3.
- Page 8 ® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 8 4. In the panel labeled This connection uses the following items:, select the Internet Pro- tocol (TCP/IP) item to highlight it, and click the Properties button. The Internet Proto- col (TCP/IP) Properties dialog box appears (Figure 9).
- Page 9 8000 to fffff 172701 bytes Code 15947 bytes Data 321128 bytes user stack/heap space Starting at 131991 ZiLOG TCP/IP Software Suite v1.1 Copyright (C) 2003 ZiLOG Inc. All Rights Reserved clock enabled IP Address: 192.168.1.50 IP Subnet: 192.168.1.0/255.255.255.0 IP Gateway: 192.168.1.254 Z8 Encore! ICE Communication Module 1.0...
- Page 10 The sample project icedemo.pro is included in the ZDS II sample directory, located in: c:\Program Files\ZiLOG\ZDSII_<product>_<version> \samples\<processor type>_<demo name> Start ZDS II for the 64K Series ICE Emulator and follow the instructions below to run ice- demo.pro.
- Page 11 ® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 11 1. Select File --> Open Project--> c:\Program Files\ZDSII_Z8Encore!_F642X_Emulator_4.6.x\samples\FZ8F642x_ICEDemo\src \icedemo.pro. 2. Double-click main.c in the Project Files window. 3. Open Project --> Settings. 4. In the General tab, verify the CPU field is set to Z8F6423. 5.
- Page 12 ® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 12 The following steps describe two ways to use the trace and event system. For Note: details on running the trace and event system, refer to the ZDS II online help and the ZDS II—Z8 Encore! User Manual, located in the docs directory of the ZDS II CD-ROM.
-
Page 13: Led Indicators
® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 13 28. Click Get Frames to display the trace information. Study the contents of the Trace window to see how the trace and event system reports program execution for the seg- ment we set using the Event tools. -
Page 14: External Interface Connectors
Dual LED D1 on the front panel indicates emulator status. If the top LED is lit, the emulator is functioning normally. If the bottom LED is lit, the emulator is not func- tioning properly. Contact technical support at http://www.zilog.com for assistance. •... - Page 15 ® Z8 Encore! 64K Series In-Circuit Emulator User Manual Page 15 3. In the Then: section of the Trace and Event System window, check the Trigger Out box to enable the Toggle and Pulse settings. 4. Select the radio button for the Trigger Out setting you wish to use. 5.
- Page 16 Fax: 408.558.8300 www.ZiLOG.com Document Disclaimer ZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products and/or service names mentioned herein may be trademarks of the companies with which they are associated.
Need help?
Do you have a question about the Encore! 64K Series In-Circuit Emulator and is the answer not in the manual?
Questions and answers