Removing/Installing Conrod - BMW R 1200 C Repair Manual

TDC
11 5 640

Removing/installing conrod

•
Turn crankshaft to TDC position.
•
Lock the clutch housing with special tool
BMW No. 11 5 640.
•
Remove conrod.
L
Note:
Conrods can also be removed/installed with the
crankshaft removed.
e
Caution:
Do not accidentally interchange conrods or bearing
shells.
•
Install conrods.
Installed direction of conrods: ..lettering facing up
11.32
11 2 500
e
Caution:
Oil the bearings.
•
Screw the big end bolts in by hand, then tighten
them with a tightening angle indicator,
BMW No. 11 2 500.
e
Caution:
Use big end bolts once only.
X
Tightening torque:
Big end bolts oiled
Joint torque.................................................. 20 Nm
Wrench angle ................................................... 80 °
RS110210