Dismantling/Reassembling Output Shaft; Stripping Down Output Shaft - BMW R 1200 C Repair Manual

17
16
18
19
20

Dismantling/reassembling output shaft

Stripping down output shaft

e
Caution:
To avoid damaging the needle roller bearing at the
splines, open it out carefully at the joint line before
removing.
00 7 500
20
•
Using universal puller, BMW No. 00 7 500, pull
off deep-groove ball bearing (22) together with
1st gear wheel (20).
23.14
1
2
3
4
15
14
13
12
11
21
22
22
KR230110
5
6
10
9
8
•
Remove spacing washer (21), shift gear wheel for
1st gear (20), needle roller bearing (19) and
spacing washer (18).
•
Remove sliding gearwheel (7).
•
Remove circlip (8), support washer (9), shift
gearwheel for 3rd gear (10) and needle roller
bearing (11).
•
Remove support washer (12), 4th gear shift
wheel (13), needle roller bearing (14) and support
washer (15).
•
Remove circlip (16) and sliding gearwheel for
5th gear (17).
•
Turn output shaft (6) and clamp into the vise with
soft jaws.
•
Using universal puller, BMW No. 00 7 500, pull
off deep-groove ball bearing (1) together with
shift gearwheel for 2nd gear (4).
•
Remove shim washer (2), needle roller bearing (3),
shift gearwheel for 2nd gear (4) and thrust wash-
er (5).
7
KR230100