Figure 3-29. Removing and Installing the RAID Battery Compartment
1
securing tabs (2)
13 Remove the system board:
Pull up the spring-loaded blue retention pin located in the center of the system board, and then
a
slide the system board toward the front of the chassis until it stops. See Figure 3-30.
Slowly and evenly lift the system board above the retention hooks, ensuring that the system board
b
is clear of all retention hooks, then evenly lift up the left side of the system board. See Figure 3-30.
Lift the system board out of the chassis, left side first.
c
92
Installing System Components
1
2
securing slots (2)
2
3
RAID battery compartment
3