Table of Contents
Related Manuals for Miele professional PG 8057 TD
Summary of Contents for Miele professional PG 8057 TD
- Page 1 Operating instructions Commercial dishwasher PG 8057 TD To avoid the risk of accidents or damage en - GB, IE to the appliance, it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Notes about these instructions.................. 5 Operating steps ........................5 Guide to the appliance ...................... 6 Overview..........................6 Control panel ......................... 7 Correct application ...................... 8 Warning and Safety instructions.................. 9 Correct installation ........................ 9 Technical safety........................9 Correct use.......................... 11 Safety with children ......................12 Accessories ......................... - Page 3 Contents Lower basket ........................40 Loading plastic trays ......................42 Operation.......................... 44 Adding cleaning agent......................44 Tips for the Super short programme ................... 45 DOS module ........................46 LEDs in the buttons ......................49 Switching on........................50 Selecting a programme ....................... 50 Starting a programme ......................
- Page 4 Contents Additional functions......................79 Reset .......................... 79 Increased water level...................... 80 Interim rinse........................ 80 DOS dispensing system .................... 81 Temperature / Time ...................... 84 Releasing programmes ....................... 87 Water hardness ........................88 Display view ........................88 Display..........................89 Contrast.......................... 89 Brightness ........................
-
Page 5: Notes About These Instructions
Notes about these instructions Important warnings Information which is important for safety is highlighted in a thick framed box with a warning symbol. This alerts you to the potential danger of injury to people or damage to property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe. -
Page 6: Guide To The Appliance
Guide to the appliance Overview Door lock Upper spray arm (not visible) Runner for upper basket Connection for upper basket spray arm Lower spray arm Runner for lower basket Data plate Rinsing agent reservoir Door lock barrel Salt reservoir Dispenser for powder cleaning agent Filter combination Back: Connection for DOS modules... -
Page 7: Control Panel
Guide to the appliance Control panel On/Off button For switching the dishwasher on and off Buttons 1 - 3 (programme selector buttons) Short cut buttons for storing favourite programmes button (further programmes) For selecting further programmes Display User interface ... -
Page 8: Correct Application
Correct application Correct application This dishwasher complies with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the dishwasher, please read these instructions carefully before using it for the first time. -
Page 9: Warning And Safety Instructions
Warning and Safety instructions Correct installation Do not install this dishwasher in an area where there is a risk of explosion or freezing conditions. To ensure the stability of built-under dishwashers, they must only be installed beneath a continuous worktop that is bolted to the adjacent cabinetry. - Page 10 Warning and Safety instructions Do not connect the dishwasher to the mains electricity supply by a multi-socket unit or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating). Do not open the dishwasher casing. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults.
-
Page 11: Correct Use
Warning and Safety instructions Correct use This dishwasher is designed for operation with water and cleaning agents suitable for use in commercial dishwashers only. Organic solvents and flammable liquid agents must not be used in it. This could cause an explosion, damage rubber or plastic components in the dishwasher and cause liquids to leak out of it. -
Page 12: Safety With Children
Warning and Safety instructions To avoid material damage and corrosion, do not allow any acids or solutions containing chlorides or metals which are not rust-proof to get into the wash cabinet. Do not wash items soiled with ash, sand, wax, grease or paint in the dishwasher. -
Page 13: Symbols Used
Warning and Safety instructions Symbols used Warning: Observe the operating instructions Warning: Danger of electric shock Disposal of your old dishwasher For safety and environmental reasons, dispose of all chemical agents according to the manufacturer's instructions and to safety regulations. -
Page 14: Caring For The Environment
Caring for the environment Disposal of the packing material The packaging is designed to protect the dishwasher from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. -
Page 15: User Profiles
User profiles User groups Users can be divided into two groups: – Operatives – Experienced operators Access to "Further settings" can be blocked to general operators by using a code (see "Further settings, Code"). Operatives Operatives must be instructed in operating and loading the dishwasher and trained regularly to guarantee safe daily use. -
Page 16: Operation Tips
Operation tips Display The display is not a touch screen. The display is used to select or set the following: – the programme – the Delay start time – the settings During a programme, the display shows the following: – the programme name –... -
Page 17: Menus
Operation tips Menus This dishwasher is controlled by menus. The menus are displayed in a 3-line display on the control panel. Example: Language deutsch english (GB) The name of the menu and a maximum of two options are shown. The currently selected option is highlighted. -
Page 18: Automatic Switch-Off
Operation tips System messages The symbol denotes system messages. These give information about the current process and the status of the dishwasher. System messages are displayed individually at the end of the programme. If there are a number of system messages, subsequent messages can be displayed by pressing the OK button. -
Page 19: Symbols In The Display
Operation tips Symbols in the display Navigation arrows If a menu contains more than two options, two navigation arrows are shown beside the options. The arrow buttons and can be used to scroll through the options. Dotted line ------- If a menu contains more than two options, the end of the option list is marked by a dotted line. -
Page 20: Commissioning
Commissioning Before using for the first time During commissioning the following settings must be carried out. You will be asked to programme settings one after the other automatically, and currently selected values have a tick beside them. The commissioning process requires a set period of time which cannot be interrupted. -
Page 21: Temperature Unit
Commissioning Setting the The display will change to the screen for setting the temperature unit. temperature unit Temperature unit °C °F Use the and arrow buttons to select the temperature unit you want and confirm your choice using the OK button. Setting the The display will change to the screen for setting the date format. -
Page 22: Water Hardness
Commissioning Setting the time The display will change to the screen for setting the time of day. of day Time of day : 00 Use the arrow buttons (higher) and (lower) to set the hours and minutes and confirm each entry using the OK button. If you have selected 12 h for the clock, "am"... -
Page 23: Plumbing Connections
Set up successful Press the OK button. The dishwasher is now ready for use. PROFESSIONAL PG 8057 TD The start screen is displayed for 3 seconds. Then the first short cut button programme will appear in the display. -
Page 24: Opening And Closing The Door
Opening and closing the door Comfort door locking mechanism This dishwasher is equipped with a Comfort door locking mechanism. This door locking mechanism helps drying by opening the door by a Super short few centimetres at the end of the programme (except Reactivation Cold Drain... -
Page 25: Closing The Door
Opening and closing the door Closing the door Push the baskets right in. Raise the door upwards and push it gently until the catch audibly engages. The door will be drawn automatically into its final closed position by the closing mechanism. ... -
Page 26: Opening The Door Using The Emergency Release
Opening and closing the door Opening the door using the emergency release The emergency release may only be used when it is no longer possible to open the door normally. If the emergency release is operated during a programme cycle, hot water can escape. -
Page 27: Filling The Salt Reservoir
Filling the salt reservoir Reactivation In order to achieve good cleaning results, the dishwasher needs to operate with soft mains water. Hard water results in the build-up of calcium deposits on the load and in the dishwasher. Mains water with a hardness of more than 0.7 mmol/l (4 °dH German scale) must be softened. -
Page 28: Setting The Water Hardness Level
Filling the salt reservoir Setting the water hardness level The water softener can be set between 0 - 12.6 mmol/l (0 - 70 °dH). Further settings Select the menu. Water hardness Select and confirm your choice with the OK button. Water hardness °dH (0 - 70 °dH) The factory default for the water softener is set to a hardness of... - Page 29 Filling the salt reservoir Settings °dH °f mmol/l Display °dH °f mmol/l Display 0 0 0 0 65 6.5 1 2 1 67 6.7 2 4 2 68 6.8 3 5 3 70 7.0 4 7 4 72 7.2 5 9 5 74...
-
Page 30: Add Salt Reminder
Filling the salt reservoir Add salt reminder Fill the salt reservoir with dishwasher salt for reactivation at the end of a programme as soon as the reminder appears in the display. Confirm the message shown with the OK button. ... -
Page 31: Filling The Salt Reservoir
Filling the salt reservoir Filling the salt reservoir When filling the salt reservoir only open the door halfway to ensure that all the salt gets into the reservoir. Press the button on the lid of the salt reservoir in the direction of the ... - Page 32 Filling the salt reservoir Do not add any more than 2 kg of salt. As the salt reservoir is being filled, displaced water may run out. Clean any excess salt from around the reservoir opening and the seal around it, and then close the flap. Cold To avoid corrosion in the cabinet, run the programme (without...
-
Page 33: Adding Rinsing Agent
Adding rinsing agent Rinsing agent Rinsing agent is necessary to ensure water does not cling and leave marks on crockery during the drying phase and helps crockery dry faster after it has been washed. Rinsing agent can be poured into the reservoir in the door or can be dispensed via an external dispensing DOS module (Optional accessory - see "DOS module"). -
Page 34: Adding Rinsing Agent
Adding rinsing agent Adding rinsing agent Open the door fully. Unscrew the lid of the rinsing agent reservoir Add rinsing agent only until it is up to the maximum mark on the edge of the reservoir. The reservoir holds approx. 300 ml. Screw the lid of the rinsing agent reservoir back on securely so that ... -
Page 35: Areas Of Application
Areas of application Loading the dishwasher Remove coarse food residues from crockery. There is no need to rinse items under running water. Notes Ensure that no acid or solvent residues, especially hydrochloric acid or chlorides, get inside the wash cabinet. ... - Page 36 Areas of application Items not suitable – Wooden cutlery and crockery or items with wooden parts: these for dishwashers: may discolour and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher.
-
Page 37: Upper Basket
Areas of application Upper basket Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls etc. Light, heat resistant plastic items can also be loaded in the upper basket. O 891 upper basket With insert E 810 for e.g. -
Page 38: Adjusting The Upper Basket
Areas of application Adjusting the upper basket In order to gain more space for taller pieces of crockery in the lower or upper basket, the upper basket can be adjusted between two positions with approx. 5 cm between each position. Pull out the upper basket. ... - Page 39 Areas of application Depending on the setting of the upper basket, the following plate dimensions can be accommodated: Example upper basket O 891: Upper basket in Upper basket plate Ø Lower basket plate Ø position Upper max. 15 cm 33 cm * Lower max.
-
Page 40: Lower Basket
Areas of application Lower basket For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Only place thin, delicate glassware in the lower basket using a suitable insert or basket. U 890 lower basket carrier For plastic trays, various inserts and cutlery inserts. U 890 lower basket carrier with 2 x E 816 inserts and 2 x E 165 cutlery inserts 16 plates each with Ø... - Page 41 Areas of application U 890 lower basket carrier with an E 816 insert rotated through 90° With the E 165 cutlery insert, 16 plates each with Ø 33 cm and various items of cutlery can be loaded. Without the cutlery insert, 19 plates each with Ø...
-
Page 42: Loading Plastic Trays
Which basket combination to use will depend upon the type, shape and size of the items to be washed. For further information on baskets please contact your Miele dealer or the Miele Professional Department. Example: (lower basket) U 525 5-row wire basket The wire basket can be used for glasses with a maximum diameter of 8 cm. - Page 43 Areas of application U 534 - U 537 plastic trays with compartments for different glass heights In this example the plastic tray is connected to the top frame by long extenders. (for assembly in U 876 lower basket carrier only) The height of the basket can be altered by fitting a top frame to the Assembling a plastic tray base ...
-
Page 44: Operation
Operation Adding cleaning agent Only use cleaning agent for commercial dishwashers. Cleaning agent can be dispensed in powder form via the powder detergent dispenser or in liquid form via an external DOS module (Optional accessory - see "DOS module"). Do not use detergent tablets. The short programme durations will not allow the tablets to dissolve properly. -
Page 45: Tips For The Super Short Programme
Operation Dispensing Always follow the recommendations of the cleaning agent manufacturer. There are markings to assist with dispensing: 20, 40. The marks indicate a level of approx. 20 or 40 ml when the door is open in the horizontal position. They also indicate the approx. level in grammes (depending on the manufacturer and the coarseness of the agent). -
Page 46: Dos Module
(DOS modules) can be connected for dispensing liquid chemical agents. For more information on Miele DOS modules please contact your Miele dealer or the Miele Professional Department. Labelling the Liquid chemical agents from external containers are dispensed by siphons siphons. - Page 47 Operation Setting the For adjusting dispensing concentration see "Further settings / dispensing Additional functions / Dispensing systems". concentration Refilling or The DOS module is equipped with a level indicator which gives a changing message in the display when the level drops below the minimum. containers Refill Refill the appropriate chemical agent at the end of a programme as...
- Page 48 Operation Checking Monitor the amount of chemical agents used by regularly checking consumption the level in the container.
-
Page 49: Leds In The Buttons
Operation LEDs in the buttons Light-emitting diodes that indicate the status of the dishwasher are set into the buttons. Except for the Start/Stop button, which has a green LED in normal operation, all other LEDs light up yellow. In the event of a fault the Start/Stop button flashes red. Button Status ... -
Page 50: Switching On
Operation Switching on Open the stopcock, if it is closed. Press the button until the button's LED lights up. Close the door (the button's LED will light up). As soon as the dishwasher is ready for operation, the display changes to show the last selected programme, e.g. -
Page 51: Select Programme
Operation Programme list Programmes which cannot be selected via the short cut buttons can be selected from the programme list. Press the button. The following option menu appears in the display Select programme Vario TD Short Select the programme you want using the and buttons and ... -
Page 52: Starting A Programme
Operation Starting a programme Press the Start/Stop button. The Start/Stop button's LED will light up and the button's LED will go out. A programme can no longer be changed after it has been started. A programme can either be interrupted (see "Interrupting a programme") or cancelled (see "Cancelling a programme"). -
Page 53: At The End Of The Programme
Operation At the end of the programme After a programme which has ended normally, the Start/Stop button's LED will go out and the button's LED will flash. The middle line of the display will show the target temperature Programme alternating continually with the A0 value. The message finished will appear in the bottom line of the display. -
Page 54: Interrupting A Programme
Operation Interrupting a programme A programme which is already running should only be interrupted if strictly necessary, e.g. if the wash load is moving about significantly. Caution. The wash load and the interior of the dishwasher may be hot. Danger of scalding and burning. -
Page 55: Cancelling A Programme
Operation Cancelling a programme Only cancel a programme which has already started if strictly necessary, e.g. if you want to change the programme. In the event of a fault the programme will be cancelled automatically. Caution. The wash load and the interior of the dishwasher may be hot. -
Page 56: Additional Functions
Additional functions Delay start The start time of a programme can be delayed, e.g. to benefit from economy rates of electricity. A delay start time of between 1 minute and 24 hours can be selected. Delay start must be switched on in the Settings menu (see "Settings , Delay start"). -
Page 57: Drying Assistance
Additional functions Drying assistance To achieve better drying results, the dishwasher door will automatically open a few centimetres at the end of the programme. This function cannot be activated for all programmes (see "Programme chart"). Drying assistance can be activated or deactivated for the selected programme, even if it is switched on or off permanently under "Settings , Drying". - Page 58 Additional functions Universal Temperature 55 °C Duration If drying assistance has been activated, the drying symbol will appear in the display to the right of the programme name. If the wash cabinet temperature after the final wash phase is higher than 67 °C (e.g.
-
Page 59: Settings
Settings Opening the "Settings " menu To open the settings menu: Switch the dishwasher off. Press and hold the button and switch the dishwasher on using the button. After that, the display will show the following, for example: Menu Settings ... -
Page 60: Menu Structure
Settings Menu structure Factory defaults are shown. Menu Submenu 1 Submenu 2 Delay start Drying Language deutsch english (GB) etc..Venting DOS DOS 1 DOS 4 Date Date format DD:MM:YY MM:DD:YY Time of day Set the time Display Do not display... -
Page 61: Delay Start
Settings Delay start You can select whether Delay start appears in the Additional functions menu or not. Selecting will remove Delay start from the Additional functions menu for operators. To be able to delay the start of a programme, must be selected in order for it to be displayed in Additional functions. -
Page 62: Drying
Settings Drying You can switch assisted drying on or off for all programmes that support this function. In Additional functions you can select or deselect drying for individual programmes (see "Additional functions, Drying assistance"). Select the Settings menu. ... -
Page 63: Setting The Language
Settings Setting the language The language set will be used in the display. The flag symbol after the word "Language" acts as a guide if a language which you do not understand has already been set. If this is the case, keep selecting the option which has a flag after it until you reach the "Language"... -
Page 64: Venting Dos Modules
Settings Venting DOS modules This option is only visible when a DOS module is connected. The dispensing system for liquid agents can only dispense reliably if the system has been purged of air. The DOS system must be vented: –... -
Page 65: Setting The Date
Settings Setting the date Settings Select the menu. Date Select and confirm your choice with the OK button. In the following menu you can choose between: Date Date format Date format – This option offers two variations for date format. –... -
Page 66: Setting The Time
Settings Setting the time Settings Select the menu. Time of day Select and confirm your choice with the OK button. In the following menu you can choose between: Time of day Display – Set the time of day Display –... -
Page 67: Display
Settings Display If required, the time of day can be displayed when the dishwasher is switched off. Select Display and confirm your choice with the OK button. The following options are available: Display Do not display Do not display –... -
Page 68: Regulating The Volume
Settings Regulating the volume The dishwasher has audible tones which sound when buttons are pressed, at the end of a programme and when there are system messages. Settings Select the menu. Volume Select and confirm your choice with the OK button. ... -
Page 69: Settingthe Volume
Settings Setting The volume is always set in the same way. The display is also similar, the volume e.g.: Keypad tone Quieter Louder Set the volume using the arrow buttons (louder) and (quieter). The volume level is represented by a bar chart. On the lowest setting the tone is switched off. -
Page 70: Further Settings
Further settings Opening the "Further settings" menu To open the "Further settings" menu: Switch the dishwasher off. Press and hold the button and switch the dishwasher on using the button. After that, the display will show the following, for example: Menu Settings ... - Page 71 Further settings Display view – The display can show the Actual temperature or the Required temperature (see "Display view") Display – The display contrast and brightness can be adjusted (see "Display") Switch off after – Automatic switch off can be activated or deactivated (see "Switch off after") Factory default –...
-
Page 72: Menu Structure
Further settings Menu structure Factory defaults are shown. Menu Submenu 1 Submenu 2 Submenu 3 Code Release Further settings Enter code Block Change code Log book Consumption: Water Consumpt.:Cleaning agent Consumpt.: Rinsing agent Operating hours Wash cycles Service interval Temperature unit °C ... - Page 73 Further settings Menu Submenu 1 Submenu 2 Submenu 3 Display view Actual temperature Required temperature Display Contrast Contrast Set Brightness Brightness Set Switch off after Set the time Factory default Reset Programme settings only All settings Software version EB Id: XXXX EGL Id: XXXX EZL Id: XXXX...
-
Page 74: Code
Further settings Code A code can be used to prevent unauthorised access to various functions and system settings on the dishwasher. Further settings Select the menu. Code Select and press OK to open the relevant menu. Release – Further settings Restrict access to the menu to users with... -
Page 75: Enter Code
Further settings Release Block Enter code If in the menu you have selected the option, or if you Further settings have set the menu up for access via a code, you have to enter a code. Further settings Settings within the menu can then only be changed by people with administration rights. -
Page 76: Log Book
Further settings Log book The dishwasher controls measure the consumption levels for water, cleaning agent and rinsing agent. They also calculate the number of hours the dishwasher has been run for, how many programmes have been run and measure the service intervals. Select the Further settings menu. -
Page 77: Temperature Unit
Further settings Temperature unit The temperature can be shown in the display in degrees Celsius or degrees Fahrenheit. Further settings Select the menu. Temperature unit Select and confirm your choice with the OK button. Temperature unit °C °F –... -
Page 78: Move Programme
Further settings Move programme You can change the order of the programmes and therefore also the allocation of the shortcut buttons. You can move the programmes you use most frequently to programme places 1-3. These are then automatically allocated to the shortcut buttons. -
Page 79: Additional Functions
Further settings Additional functions It is possible to adapt individual parameters to tailor programme sequences to particular types of soiling and to optimise the cleaning result. Further settings Select the menu. Additional functions Select and press the OK button to open the ... -
Page 80: Increased Water Level
Further settings Increased water level Increased water Select the option and confirm your choice with level the OK button. The amount of water is shown in litres and can be increased in 0.5 litre increments up to 1.5 litres. Increased water level (0,0 - 1,5 l) Use the arrow buttons ... -
Page 81: Dispensing System
Further settings Dispensing system DOS dispensing Select the option and confirm your choice with system the OK button. Dispensing system DOS 2 Rinsing agent DOS1 Select the dispensing system you want and confirm your choice with the OK button. The following options are available: DOS1 Active... - Page 82 Further settings DOS venting To avoid damage to the dispensing system, make sure before venting that the containers for cleaning agent and rinsing agent are sufficiently filled and the dispensing siphons are screwed securely to the containers. DOS venting Select and confirm your choice with the OK button.
-
Page 83: Change Name
Further settings Change name Changing a DOS Select and confirm your choice with the OK button. name Change name DOS1 _ _ _ _ _ _ _ _ _ _ _ ä b c P OK # The current name is shown on the second line of the display. This can be changed using the options shown in the bottom line. - Page 84 Further settings Temperature / The temperature and holding time for the main wash and final rinse Time phases can be altered in some programmes (see "Programme chart"). Select Temperature / time and confirm your choice with the OK button. Select programme Short Universal The following options are available:...
- Page 85 Further settings Main wash Final rinse Main wash / Final The procedure for altering settings in is the rinse same. The display also looks similar. Select the Main wash Final rinse option and confirm your choice with the OK button. Short Final rinse temp.
-
Page 86: Holding Time
Further settings Holding time Holding time Select and confirm your choice with the OK button. The holding time is set in minutes and can be set between 0 and 10 minutes in 1 minute increments. Super short In the case of the programme, the holding time is set in seconds and can be set between 0 and 300 seconds in 5 second increments. -
Page 87: Releasing Programmes
Further settings Releasing programmes Individual programmes can be blocked so that they cannot be used. All programmes are released for use as default. Select the Further settings menu. Release programme Selection Release programme Select and press OK to open the relevant ... -
Page 88: Water Hardness
Further settings Water hardness You can use this menu to set the water softener to the water hardness of the mains supply. For further information see "Filling the salt reservoir". Display view During a programme the Actual or Required temperature can be shown in the second line of the display. -
Page 89: Display
Further settings Display The display menu can be used for altering the display contrast and brightness. Select the Further settings menu. Display Contrast Brightness Display Select and press OK to open the relevant menu. The following options are available: Contrast –... -
Page 90: Switch Off After
Further settings Switch off after When not in use the dishwasher will switch itself off to save energy. Further settings Select the menu. Switch off after Select and press the OK button to open the relevant menu. The following options are available: Switch off after –... -
Page 91: Factory Default Setting
Further settings Factory default setting The factory default setting can be used to reset all changed parameters in the dishwasher, or just values that have been changed for programmes, back to their default settings. Further settings Select the menu. Factory default Reset Factory default... -
Page 92: Software Version
Further settings Software version This displays the various software components. Further settings Select the menu. Software version Select and press OK to open the relevant menu. Software version EB Id: XXXX EGL Id: XXXX Software for individual units is displayed. XXXX denotes the version. –... -
Page 93: Cleaning And Care
Cleaning and care Periodic checks The dishwasher should be serviced every 1000 hours of operation, or at least once a year by Miele Service. This maintenance will cover the following: – Electrical safety according to national regulations (VDE 0701/0702 in Germany) –... -
Page 94: Cleaning The Control Panel
Cleaning and care Remove any soiling from the control panel and from the front of the dishwasher straight away. Soiling that is left too long might become impossible to remove and could cause the external surfaces to alter or discolour. ... -
Page 95: Cleaning The Door And The Door Seal
Cleaning and care Cleaning the door and the door seal Wipe the door seal and the area beneath the door regularly with a damp cloth to remove food deposits. Wipe away any spillages of food and drink from the sides of the ... - Page 96 Cleaning and care Cleaning the flat Remove the coarse filter. and micro-fine filters Grasp the micro-fine filter by the upper rim and turn it in the direction of the arrow to release it. Then lift it out. Remove the flat filter. ...
-
Page 97: Cleaning The Spray Arms
Cleaning and care Cleaning the spray arms This dishwasher has three different spray arms. Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly. Switch the dishwasher off. ... - Page 98 Cleaning and care Use a pointed object to push food particles into the spray arm jets. Rinse the spray arms thoroughly under running water. Replace the spray arms and check that they rotate freely. Make sure that the spray arm with the yellow bayonet fitting is fitted in the bottom of the wash cabinet.
-
Page 99: Problem Solving Guide
Problem solving guide With the help of the following guide, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appliances should only be carried out by an authorised Miele service technician. - Page 100 Problem solving guide Problem Cause and remedy Fault 412-414 Water inlet fault. One of these fault numbers will appear in the display if the flow pressure is too high and the programme will be cancelled. The flow pressure at the water intake point is too high ...
-
Page 101: Door
Problem solving guide Door Problem Cause and remedy The door opens again after If too much force is used when closing the door, the being closed. Comfort door locking mechanism will reopen the door. Close the door with less momentum. ... -
Page 102: General Problems With The Dishwasher
Problem solving guide General problems with the dishwasher Problem Cause and remedy The dishwasher fails to The dishwasher has switched itself off after the set "switch react when buttons are off after" period to save energy. pressed. The display and Press the ... -
Page 103: Noises
Problem solving guide Noises Problem Cause and remedy Knocking noise in the A spray arm is knocking against an item in a basket. wash cabinet. Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the wash Items are insecure in the wash cabinet. -
Page 104: Unsatisfactory Cleaning Result
Problem solving guide Unsatisfactory cleaning result Problem Cause and remedy The dishes are not clean. The dishes were not loaded correctly. Please observe the instructions in "Loading the dishwasher". The programme was not suitable for the load. Select a more suitable programme (see "Programme ... - Page 105 Problem solving guide Problem Cause and remedy White residue is visible on The rinsing agent dosage is set too low. crockery and cutlery, Increase the dosage (see "Further settings, Additional clouding occurs on functions, Dispensing systems"). glassware; film can be There is no salt in the salt reservoir.
-
Page 106: Maintenance
Maintenance Clean the water intake filters Filters are incorporated into the water inlet connection on the hose to protect the water inlet valve. If these filters get dirty they must be cleaned as otherwise too little water will flow into the wash cabinet. ... -
Page 107: Cleaning The Drain Pump And Non-Return Valve
Maintenance Cleaning the drain pump and non-return valve If water has not pumped away at the end of a programme, there may be a foreign object in the drain pump or blocking the non-return valve. These are easy to remove. Disconnect the dishwasher from the mains (switch the dishwasher ... - Page 108 Maintenance The drain pump is situated under the non-return valve (see arrow). Check the area around the drain pump for foreign objects (watch out for glass splinters which could cause injury) and remove them before replacing the non-return valve. Carefully replace the non-return valve and secure it with the clamp.
-
Page 109: After Sales Service
After sales service After sales service If, despite following the instructions in this manual, you are unable to rectify a problem please contact Miele or your Miele Service Dealer quoting the fault code shown in the display. Contact details for Miele are given at the back of this manual. N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions. -
Page 110: Programme Chart
Programme chart Programme Powder cleaning agent Follow cleaning agent manufacturer's recommendations on dosage For items that need to be hygienically clean. 20 - 30 g in the cleaning agent dispenser Hygiene Plus "Quick programme" for lightly soiled crockery that is in 20 - 30 g continual use and that has fresh, easily removed food placed on the inside of the door... - Page 111 Programme chart Programme sequence Pre-wash Pre-wash Main wash Interim Interim Final rinse Drying (1) / (2) rinse rinse (1) / (2) 60 °C 83 °C 3 min 5 min X *) 55 °C 55 °C 30 s 30 s 65 °C 60 °C 3 min 1 min...
- Page 112 Programme chart Programme Powder cleaning agent Follow cleaning agent manufacturer's recommendations on dosage Special programme for plastic items and other lightweight 20 - 30 g items. in the cleaning agent dispenser Plastics This programme is the most efficient in terms of its combined 20 - 30 g energy and water consumption for cleaning normally soiled in the cleaning agent dispenser...
- Page 113 Programme chart Programme sequence Pre-wash Pre-wash Main wash Interim Interim Final rinse Drying (1) / (2) rinse rinse (1) / (2) 50 °C 60 °C 5 min 1 min 46 °C 50 °C 10 min 2 min Reactivation sequence X = stages included in a programme (X) = optional programme stages which can be selected (see "Further settings, Additional functions") (1) Temperature range 30 - 93°C (see "Further settings, Additional functions").
-
Page 114: Installation
Installation Installation In order to reduce the risk of damage from condensation, the furniture in the area around the dishwasher should be designed for commercial use. The dishwasher must be installed in a secure and level position. Any unevenness in the floor level and height of the appliance must be compensated for by adjusting the four feet. - Page 115 Installation Levelling and To guarantee stability the dishwasher must be secured to the worktop securing the after levelling. dishwasher After levelling, secure the dishwasher to the continuous worktop. With the door open, screw into the worktop through the holes in the front trim on the left and right hand sides of the dishwasher.
-
Page 116: Moving The Dishwasher
Installation Moving the dishwasher Before moving the dishwasher screw in the adjusting feet fully so that they do not get damaged. Do not lift the dishwasher by any protruding components, e.g. the control panel. This could break off. Only transport the dishwasher on a sack barrow in its original packaging. -
Page 117: Electrical Connection
Electrical connection Electrical connection All electrical work must be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. – In the U.K. it must comply with BS 7671. – Connection to the power supply must be made via a suitable plug and socket which conforms to national regulations and must be accessible for service and maintenance work after the machine has been installed. -
Page 118: Plumbing
Plumbing Connection to the water supply The water in the dishwasher must not be used as drinking water. Do not re-use removable hose attachments. Use the hose supplied with this dishwasher. – The dishwasher must be connected to the water supply in strict accordance with current local and national water authority regulations. - Page 119 Plumbing – Install the filter (supplied in accessory pack) between the stopcock valve and the inlet hose (see illustration in "Maintenance, Clean the water intake filters"). Do NOT shorten or otherwise damage the inlet hoses (see diagram). See installation diagram supplied.
-
Page 120: Connecting The Drain Hose
Plumbing Connecting the drain hose – The dishwasher drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the dishwasher via the drain hose. – The dishwasher should preferably be connected to a separate on- site drainage system. -
Page 121: Technical Data
Technical data Height 820 mm (adjustable + 60 mm) Height with lid 835 mm (adjustable + 60 mm) Width 598 mm Depth 600 mm with door open 1200 mm Weight (net) 70 kg Voltage, connected load, fuse rating See data plate Mains cable Approx. 1.7 m Water temperature: Cold water connection max. - Page 124 United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Professional Sales, Tel: 0845 365 6608 E-mail: professional@miele.co.uk Malaysia Internet: www.miele-professional.co.uk Miele Sdn Bhd Australia Suite 12-2, Level 12 Miele Australia Pty. Ltd. Menara Sapura Kencana Petroleum ACN 005 635 398 Solaris Dutamas No.
Need help?
Do you have a question about the PG 8057 TD and is the answer not in the manual?
Questions and answers