Icom UT-111 Instruction Manual page 26

4 ¢ Programming
The following programming sequence is in the order of the
functions listed on the System | screen in figure 6.
Select System | from the Screen menu.
¢ Area number — This system information must be
provided by the system operator. Typical options are
L or 0.
@ Home Repeater — This system information must be
provided by the system operator. The Home Repeater
must be assigned to a specific valid channel number
with correct frequency information for the system.
¢ Priority Receive ID ~ This feature is optional. Refer
to the Operation section 1.2 under Priority Receive
ID for a detailed explanation of this feature.
@ Receive Block Decode Upper ID and Receive Block
Decode Lower ID ~ This feature is optional. Refer to
the Operation section 1.2 under Block Decode ID for
detailed information.
23