Icom UT-133 Instructions

Bluetooth UNIT
®
UT-133
About the UT-133
The UT-133 is a Bluetooth ®
ceiver to communicate with other Bluetooth
Please refer to the transceiver's instruction manual for de-
tails regarding installation and use of the UT-133 with the
transceiver.
UT-133
Bluetooth
Transceiver
Electromagnetic Interference
When you use a Bluetooth ®
ing:
Bluetooth ® devices operate on the 2.4 GHz band.
The 2.4 GHz band is also used by other devices, such as
wireless LAN products, microwave ovens, RFID systems,
amateur radio stations, and so on.
When using a transceiver with the UT-133 installed and
turned ON near such devices, interference may occur, caus-
ing a decrease in communication speed, and an unstable
connection.
In such cases, use the transceiver with the UT-133 away
from the other devices, or stop using those devices.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
The Bluetooth work mark and logos are registered trademarks
®
owned by Bluetooth SIG, Inc. and any use of such marks by Icom
inc. is under license.
All other products or brands are registered trademarks or trade-
marks of their respective holders.
INSTRUCTIONS
unit to be installed in a trans-
® devices.
®
Android ® device
(third party)
VS-3
device, pay attention to follow-
Thank you for purchasing the UT-133
Installing the UT-133 in a transceiver allows you to
use a variety of Bluetooth
Please read this instructions carefully and complete-
ly before installing the UT-133.
Precautions
The Bluetooth ® communication range may vary, depending
on the environment in which the device operates. Micro-
wave ovens or wireless LAN may cause an interference.
In that case, stop using those devices or move away the
Bluetooth ® device from the other devices.
This Bluetooth ® device has a range of use. If the communi-
cation is unstable, use the device within the range.
DO NOT
put anything on top of the unit, before installing.
DO NOT
drop, impact or vibrate the unit, before installing.
This may damage to the unit.
You may not be able to use some Bluetooth
tion, even if the unit is installed.
Radio operator warnings
• Do not use a transceiver with the UT-133 installed and
turned ON near medical equipment, or near a person who
has a pacemaker. Radio waves from the transceiver may
cause interference, or endanger their life.
• Do not use a transceiver with the UT-133 installed and
turned ON near microwave ovens. Interference may occur.
• Do not make any changes or modifications to the unit.
Specifications
• Bluetooth ® version: Bluetooth
• Transmission Output: Class 1
• Supported profiles: HFP, HSP, SPP
• The maximum number of paired Bluetooth
8 devices*
* You can pair with up to 8 headsets and
data devices. The 8 paired devices can-
not be all headsets or all data devices.
• Dimensions: 20.0(W) x 35.0(H) x 5.3(D) mm
(0.79(W) x 1.38(H) x 0.21(D) inch)
• Weight: 3 g (0.11 oz) (approximately.)
• Device Name: Icom BT-001 (default value)
• Passkey: 0000 (four zeros)
The specifications are subject to change without notice or
obligations.
.
Bluetooth
unit
®
devices.
®
® device's func-
® Version 3.0
® devices: