Wen DP1062V Instruction Manual
  1. Manuals
  2. Brands
  3. Wen Manuals
  4. Power Tool
  5. DP1062V
  6. Instruction manual
Wen DP1062V Instruction Manual

Wen DP1062V Instruction Manual

10" variable speed drill press
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL DP1062V
10" VARIABLE SPEED
DRILL PRESS
Instruction Manual
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-847-429-9263 (M-F 8AM-5PM CST)
TECHSUPPORT@WENPRODUCTS.COM
IMPORTANT: Your new tool has been engineered and manufactured to WEN's highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
WENPRODUCTS.COM
For replacement parts and the most up-to-date instruction manuals, visit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DP1062V and is the answer not in the manual?

Questions and answers

Related Manuals for Wen DP1062V

Summary of Contents for Wen DP1062V

  • Page 1 1-847-429-9263 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

  • Page 2: Table Of Contents

    CONTENTS WELCOME Introduction ......................3 Specifications ....................3 SAFETY General Safety Rules ..................4 Drill Press Safety Warnings ................6 Electrical Information ..................8 BEFORE OPERATING Know Your Drill Press ..................9 Assembly & Adjustments ................10 OPERATION & MAINTENANCE Operation ......................18 Maintenance ....................21 Troubleshooting Guide ..................22 Exploded View &...

  • Page 3: Welcome

    INTRODUCTION Thanks for purchasing the WEN Drill Press. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool.

  • Page 4: Safety

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 5: California Proposition 65 Warning

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 6: Drill Press Safety Warnings

    DRILL PRESS SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. 1. TOOL PURPOSE. This drill press is designed to drill through metal wood, plastic, and tiles. Drilling through other materials could result in fire, injury, or damage to the workpiece.
  • Page 7 SPECIFIC RULES FOR THE DRILL PRESS DRILL PRESS SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. 12. DRILLING THE WORKPIECE. •...

  • Page 8: Grounding Instructions

    ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug.

  • Page 9: Before Operating

    KNOW YOUR DRILL PRESS TOOL PURPOSE Drill presses are mainly used to drill clean, precise cylindrical holes into workpieces or enlarge existing holes. You may also find other uses for your drill press such as reaming, countersinking, counterboring, tapping, etc. Refer to the diagram below and on page 10 to become familiarized with the parts and controls of your drill press.

  • Page 10: Assembly & Adjustments

    ASSEMBLY & ADJUSTMENTS UNPACKING With the help of a friend or trustworthy foe, carefully remove the drill press from the packaging. Make sure to take out all contents and accessories. Do not discard the packaging until the drill press is completely assembled. Before using the drill press, you must assemble the unit using the instructions in this section.
  • Page 11 ASSEMBLY & ADJUSTMENTS WARNING! Do not plug in or turn on the tool until it is fully assembled according on the instructions. Failure to follow the safety instructions may result in serious personal injury. ATTACHING COLUMN TO BASE (FIG. 2) 1.
  • Page 12 ASSEMBLY & ADJUSTMENTS DRILL PRESS HEAD TO COLUMN (FIG. 6) CAUTION! The drill press head is heavy. To avoid injury, two people should lift it into position. 1. Carefully lift the drill press head assembly (Fig. 6 - 1) and position it over the column (Fig.
  • Page 13 ASSEMBLY & ADJUSTMENTS INSTALL THE CHUCK (FIG. 10) 1. Inspect and clean the taper hole in the chuck and the spindle. Remove all grease, coatings, and particles from the chuck and chuck arbor surfaces with a clean cloth. 2. Open the chuck jaws by manually turning the chuck barrel clockwise.
  • Page 14 ASSEMBLY & ADJUSTMENTS TILT THE TABLE (FIG. 12) 1. Loosen the bevel lock bolt (under table) with a suitable socket or wrench (not included). 2. Tilt the table to the desired angle, using the bevel scale (Fig. 12 - 1) as a basic guide. 3.
  • Page 15 ASSEMBLY & ADJUSTMENTS SQUARING THE TABLE TO THE DRILL BIT 1. Insert a 3-inch drill bit into the chuck and tighten. 2. Raise and lock the table about 1 inch from the end of the drill bit. 3. Place a combination square on the table. The drill bit should be parallel to the straight edge of the square. 4.
  • Page 16 ASSEMBLY & ADJUSTMENTS SPINDLE RETURN SPRING (FIG. 14A) The spindle is equipped with an auto-return mechanism. The main components are a spring and a notched housing. The spring was properly adjusted at the factory and should not be readjusted unless absolutely necessary.
  • Page 17 ASSEMBLY & ADJUSTMENTS DRILL PRESS ON/OFF SWITCH (FIG. 15) 1. To turn the drill press ON, insert the yellow safety key (Fig. 15 - 1) into the switch housing (Fig. 15 - 2). As a safety feature, the switch cannot be turned ON without the safety key. 2.

  • Page 18: Operation & Maintenance

    OPERATION LASER LINE ON/OFF SWITCHES (FIG. 16) The laser switch (Fig. 16- 1) is located on the left hand side of the drill press. 1. Pull the tab located below the laser switch and lift up the laser switch cover (Fig. 16 - 2). 2.

  • Page 19: Drilling Speeds

    OPERATION ADJUST THE DRILLING DEPTH (FIG. 17) 1. Loosen the depth scale knob and turn the depth scale ring to the desired depth. 2. Lock the scale ring in place by tightening the depth knob. This will stop the bit once it reaches a certain depth. DRILLING SPEEDS NOTE: View Drill Bit Size Recommendations on page 20 for general Fig.
  • Page 20 OPERATION FEEDING THE DRILL BIT • Pull down on the feed handles with only enough force to allow the drill bit to cut. • Feeding too rapidly might stall motor, cause the belt to slip, damage the workpiece, or break the drill bit. •...

  • Page 21: Maintenance

    WARNING! Any attempt to repair or replace electrical parts on this tool may be hazardous. Servicing of the tool must be performed by a qualified technician. When servicing, use only identical WEN replacement parts. Use of other parts may be hazardous or induce product failure.

  • Page 22: Troubleshooting Guide

    TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-847-429-9263, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM CAUSE SOLUTION...
  • Page 23 TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-847-429-9263, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM CAUSE SOLUTION...

  • Page 24: Exploded View & Parts List

    EXPLODED VIEW & PARTS LIST...
  • Page 25 EXPLODED VIEW & PARTS LIST Part No. Description Qty. Part No. Description Qty. 4212B-001 Retaining Plate 4212B-037 Battery Housing Cover 4212B-002 Set Screw, M8x12 4212B-038 Battery Housing 4212B-003 4212B-039 Handle Seat 4212B-004 Ball Bearing, 6907Z 4212B-040 Spring Pin, 5-15 4212B-005 Elastic Ring 4212B-041 Feed Shaft...
  • Page 26 Power Cord 4212B-089 M5x12 4212B-111 AA Battery Variable Speed Handle 4212B-112 Screw, M4x8 4212B-090 Seat 4212B-113 Screw, M5x8 4212B-091 Variable Speed Handle 4212B-114 Counter Base 4212B-092 Butterfly Spring 4214B-116 Hex Wrench, 6mm 4212B-093 Hex Nut M10 DP1062V-117 Motor Assembly, 6.2A...

  • Page 27: Warranty Statement

    WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
  • Page 28 THANKS FOR REMEMBERING V. 2024.08.17...

Table of Contents