Advertisement
tive aluminum casting -
RBS
patch matching the curve boundaries
and CAD data -
D data
-
d measured data
s at specific points
Trimmed NURBS surfaces
Create geometrically shaped surfaces such as cones and planes.
Trim the data with these surfaces.
Major applications
Automotive/motorcycle manufacturers and parts maker
Dimensional inspection of cast/forged parts. Checking of the margin
remaining for secondary processing
Accuracy inspection, parts inspection, interference check with
mechanical parts, die verification of press- or plastic-molded
products
Inspection/analysis of car seats, tires, and cushioning materials
Reverse engineering using actual objects, mock-ups, and scale
models of car seats, headrests or wheels
Alignment with CAD data
The application examples shown here use Polygon Editing Tool Ver.2.0 and optional Revers software.
High-continuity surface data
Example of continuous surface evaluation using environment mapping
Companies in heavy industry, iron/steel or heavy equipment manufacturers
Inspection of turbine blades, steel pipes and steel plates. Design of heavy
equipment
Other manufacturers
Inspection or reverse engineering of interior/exterior wall materials and
modular bath units
Inspection of train rail wear, tanks at hydroelectric power plants, and turbine
blades
For other applications, visit our website below
http: //se.konicaminolta.us/3d
Color map calculation
Inspection evaluation report
Comparison between CAD data and measured data
Color map display providing at-a-glance
indication of sections within/outside the
tolerance range (contour display)
Digital Process Re-engineering
3D
CAD
IGES
Advertisement
