Advertisement
Quick Links
Advertisement
Related Manuals for JEI MAGBEAST HM50
Summary of Contents for JEI MAGBEAST HM50
- Page 1 SAFETY INSTRUCTIONS AND OPERATORS MANUAL DRILLING MACHINE MODEL HM50 MODEL HM50T JEI DRILLING & CUTTING SOLUTIONS LTD Unit 21 Empire Business Park, Enterprise Way, Burnley, Lancashire England BB12 6LT U.K. Tel. +44 (0)1706 229490 P a g e www.jeiuk.com e-mail: sales@jeisolutions.co.uk...
-
Page 2: Electrical Connection
• Allen key and jib strip adjustment • Allen key for arbor • Drill drift • Chuck & Key (Optional extra JEI PART # JEICA-2MT) ELECTRICAL CONNECTION Before starting the machine, please check the correspondence between voltage and frequency against the data mentioned on the identification plate. Voltage differences of + 6% and –... -
Page 3: Safety Instructions
6. Remove rings, watches, ties etc. that could tangle in the moving machine parts 7. Keep the unit and the workplace as clear of dirt and swarf as possible – check out JEI Magbrushes for quick and effective collection of swarf. - Page 4 8. DRESS PROPERLY: Do not wear loose clothing. They can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair. 9. USE SAFETY GLASES: All persons in the area where power tools are being operated should also wear safety eye protectors and face or dust masks.
-
Page 5: Enviromental Protection
children) or those who cannot handle the tool correctly. 22. CONFIRM THAT NO ITEMS SUCH AS AN ELECTRIC CABLE OR CONDUIT ARE BURIED INSIDE: In places where live wiring may be hidden behind a wall, floor, ceiling, etc. Do not hold or contact any metal parts of the tool. -
Page 6: Dust Protection
and can be disposed of accordingly. The tools plastic components are marked accordingly to their material, which makes it possible to remove environmentally friendly and differentiated because of available collection facilities. ONLY FOR EU COUNTRIES Do not dispose of household tools together with household waste material, In observance of European directive 2012/19/EU on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to... -
Page 7: Operating The Machine
conjunction with additives for wood conditioning (chromate, wood preservative). Material containing asbestos must only be treated by specialists. OPERATING THE MACHINE a) Fitting the cutter or drills, always unplug the power source to the machine before fitting or removing cutters or drills into the arbor. To fit cutters loosen both screws to permit the cutter shank to fit fully into the arbor ensuring the flats of the cutter are in line with set screws, then tighten the set screws until the cutter is safely locked in to the arbor. -
Page 8: Mounting The Tool
Too much pressure will NOT speed up the cut, it will reduce the life of the cutter and may cause damage to the motor. If the turnings become blue add more oil. At the end of the cut the slug will be ejected, check before commencing next hole. - Page 9 HM50/HM50T...
- Page 10 HM50/HM50T PARTS LIST MAGNET BASE HM50-01 MAIN BODY CASTING HM50-03 MOTOR STOP/START SWITCH HM100-34 MAGNET/POWER SWITCH 35708 FUSE HOLDER HM50-07 BARE SWITCH PANEL HM50-SP HM50 COMPLETE SWITCH PANEL HM50-PNL HM50T COMPLETE SWITCH PANEL HM50T-PNL110 SWITCH PLATE FIXING SCREWS (4) HM50-12 CABLE GLAND FOR MAINS CABLE 0151064 MAINS CABLE...
- Page 11 EIB14 _ TWO SPEED DRIVE UNIT _ 230V Sr. No. PART NAME PART No. QTY. Auto Cutoff Carbon Brush Pair 32099MB42 Brush Holder SA total 33199MB35 Brush Holder SA (32099MB02) Wave washer M4 TYPE B (34217MB04) CH screw M4x12 (31617101MB00) Star Washer M4 (32117MB30) CH screw M4 x 8 (31017301MB00) CH Self Tap Screw 4.8X38...
- Page 12 HM50 MOTOR PARTS No. Description Part No Description Part No HM51 Locking Ring 15/1 HM535 Self tapping screw HC 4.8x45 HM52 Shaft for Gear Box 13Z HM536 Armature 220v HM53/2 Grooved Ball Bearing 608 HM537 Grooved Ball bearing 608 2Z HM54 Gear Block 34/40Z HM538...
- Page 14 Enterprise Way, Burnley, Lancashire, UK, BB12 6LT Declare with full responsibility that product: MAGBEAST HM50 / HM50T DRILLING MACHINE WITH ELECTROMAGNETIC BASE which the declaration applies to is in accordance with the following standards: EN 62841-1:2015, EN 55014-1:2017, EN ISO 12100:2010,...
- Page 15 JEI Twelve (12) month limited warranty JEI warrants the HM50 / HM50T Drilling machine to be free of defects in material and workmanship under normal use for a period of twelve months from date of purchase. This warranty does not cover damage or wear which arise from misuse, accident, tampering or any other causes not related to defects in workmanship or materials.
Need help?
Do you have a question about the MAGBEAST HM50 and is the answer not in the manual?
Questions and answers