Copying Selected Images - Minolta DIMAGE V - MAC Manual

VIEWER PANEL

COPYING SELECTED IMAGES

Selected images on the image memory card can be copied to
removable media or your computer's hard drive.
1. Display the thumbnail images from the camera
in the viewer panel (pp. 22).
2. Click on the image to be copied. Select multiple
images by holding down the shift key while
clicking on images.
• A border, or cursor, will appear around the selected images.
• Deselect an image by clicking on it while holding down the shift key.
3. Select Copy Selected Images to Disk... from
the Viewer menu.
24
• The following dialog box will appear.
4. Select the folder from the pop-up menu in the
dialog box where the file will be saved.
5. Enter a new file name in the box labeled Image
File Name Prefix:.
• This will be the prefix of the file name. A numerical suffix will be
added automatically to the file name (see EXIF at bottom of page).
6. Click on Save.
• The viewer panel will return when the operation is complete.
EXIF:
Images are automatically saved in the EXIF file format. The name of an
EXIF file consists of the entered file name as the prefix and a three-digit
numerical suffix. The numerical suffix represents the order which a file
was saved. For example: if two files are selected, the entered file name
will apply to both images and their file names will have a suffix
representing the sequence they were saved - Entered File Name 001 and
Entered File Name 002.
Copied images can be displayed as thumbnails on the viewer panel.
Dimâge V images can also be acquired from the camera into
applications such as Adobe PhotoDeluxe™ using the QTIC plug-in
(pp. 84 - 85).
Select the folder
where the file will
be saved.
Name the file.
This will be the
prefix.
25