Copying Images - Minolta DiMAGE 7i Instruction Manual

PLAYBACK MODE

COPYING IMAGES

Image files can be copied from one CompactFlash card to another. Up to 15MB of data can be trans-
ferred. Every time the copy function is used, a new folder is automatically created for the image(s).
This frame – To copy the image currently displayed.
Marked frames – To copy single or multiple images. When selected, the frame-selection screen (p.
112) will appear; highlight the images to be copied with the yellow border and then press the up key
of the controller to mark it with the check icon. To deselect an image, highlight the selected thumbnail
and press the down key; the check icon will disappear. Continue until all the images are marked.
Press the controller to continue, or press the menu button to cancel the operation and return to the
playback menu.
If too many images have been selected, a warning will appear and the copy routine will be canceled.
Divide the number of images into two or three batches.
When the controller is pressed, a screen with four messages will
be displayed; the messages are highlighted as the copying pro-
cedure is executed.
120
When the change-CF-card message is highlighted, remove
the camera's CompactFlash card and insert the card to
which the image should be copied. Press the central button
of the controller to continue.
Play Copy
Copying to camera memory.
1
Please change CF card.
2
Copying to CF card.
3
Copying completed.
4
Enter