Related Manuals for Elite SOLDAmaq HF
Summary of Contents for Elite SOLDAmaq HF
- Page 1 ELITE SOLDAmaq HF User manual Version May 2024 Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es...
- Page 2 THIS PAGE IS NOT WRITTEN INTENTIONALLY Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es...
-
Page 3: First Steps
Congratulations on your purchase of the ELITE SOLDAmaq HF high frequency generator welder. Please read this guide before you begin. ELITE SOLDAmaq HF is specially designed for the saw blade producer or grinding shop with high demands for saw blade tip repair. -
Page 4: Safety Regulations
The installation and maintenance of the machine described in this manual must be carried out only by operators who are familiar with its operation and have sufficient technical knowledge. The ELITE SOLDAmaq HF welding machine has been designed for the repair of circular saws, excluding any other type of operation. - Page 5 These warnings do not include all possible risks that improper use of the machine could cause. For this reason, the operator must proceed with prudence and observing the rules. Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es...
- Page 6 Use of the machine by untrained persons. • Serious failures in scheduled maintenance. • Unauthorized interventions or modifications. • Use of non-original spare parts. Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es...
-
Page 7: Declaration Of Conformity
2.3.Declaration of conformity The company hereby Elite Sharpening Machines, SLU C/Joan Oró, 27 ES-08635 Sant Esteve Sesrovires declares that the product indicated below, based on its conception and construction, as well as the version put on the market by our company, complies with the mandatory basic health and safety re- quirements of the CE directive. - Page 8 THIS PAGE IS NOT WRITTEN INTENTIONALLY Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es...
-
Page 9: Technical Data
SOLDAmaq HF basic 1600 x 1150 x 2070 mm. 340 kg. SOLDAmaq HF with pyrometer 1600 x 1150 x 2070 mm. 370 Kg. Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – ... - Page 10 4.TRANSPORT The ELITE SOLDAmaq HF is delivered packed in a wooden box. During all transportation and transfer, the machine must be kept in its original vertical position; any variation in this position may lead to the loss of the warranty.
- Page 11 Once the machine is in its final location, the protective film and other component protections, which secure and prevent the machine from moving, can also be removed. Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es...
-
Page 12: Installation
A poor leveling of the machine can cause unwanted vibrations and premature wear of the linear guides. WARNING: The machine must not be used under any circumstances by unqualified or unauthori- zed personnel. Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es... -
Page 13: Electrical Connection
This installation must be carried out by qualified technical personnel and checked with a voltmeter before turning on the machine. ELITE Sharpening Machines, rejects all responsibility for a poor connection, which in addition to causing the machine to malfunction can damage people, animals, and material objects. - Page 14 5.3.Cooling circuit water connection The ELITE welding equipment model SOLDAmaq HF comes pre-wired with cooling tubes. You must check the coolant level upon receiving the welder and fill exclusively with water for the cooling circuit in the upper caps indicated for this purpose.
-
Page 15: Main Components Of The Machine
H: Lamp I: Inductor coil support head K: Tool tray L: Weld activation pedal M: Inductor coil N: Tungsten carbide insert magazine Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – info@elite.es... - Page 16 For sections 6 to 8 of this manual, as well as for more up-to-date information and useful videos on the operation of the machine, please refer to our website www.elite.es www.elite.es/en/support/manuals/soldamaq-hf For more up-to-date information and useful videos on how to operate the machine, see our website www.elite.es...
Need help?
Do you have a question about the SOLDAmaq HF and is the answer not in the manual?
Questions and answers