Power On/Off - Pipeline BOX DNA60C Instructions For Use Manual

I I . G E T T I N G S T A R T E D
Follow the steps below to set up your new PIPELINE BOX DNA60C:
1. Open the battery compartment by unscrewing the battery cap.
2. Insert a compatible and fully charged battery into the battery compartment.
Make sure to align the battery's poles correctly!
Use only high-drain Li-ION batteries (single, unprotected, flat-top)!
For higher power ranges (>20 watts), we strongly recommend using batteries with a
discharge current of at least 20 amperes!
3. Close the battery compartment by screwing in the battery cap.
For operation with an 18500 or 18350 battery cell, you must use a corresponding-sized
battery sleeve (not included in the package)!
In its default state, the PIPELINE BOX DNA60C can only be operated with an 18650
battery!
4. Screw a compatible and functional 510 atomizer into the 510 connector.
Always follow the manufacturer's guidelines and instructions when setting up your
atomizer!
5. The PIPELINE BOX DNA60C is now ready for operation.
For further important information and usage instructions, please refer to the user
manual provided.
20 English
I I I . I N S T R U C T I O N M A N U A L
The PIPELINE BOX DNA60C is equipped with the DNA 60 Color chipset from Evolv,
an extremely powerful and adaptable chipset that can be further customized using Evolv's
"EScribe" software. Due to the extensive range of settings available with this electronic
system, only the most basic functions will be discussed below.
For more in-depth information about the features and operation of the Evolv DNA60C
chipset, please visit: www.pipeline-store.com/manual
You can access the proprietary "EScribe" software and the "Evolv DNA Forum" here:
https://www.evolvapor.com/escribe
POWER ON / OFF
After inserting a battery, the device will automatically turn on. If you do not plan to use
the device for an extended period or if you intend to transport it in your carry-on luggage,
we strongly recommend removing the battery and storing it separately in an appropriate
container!
All settings made will be retained even after the battery is removed.
STANDBY
To ensure the longest possible battery life, the PIPELINE BOX DNA60C enters standby
mode 30 seconds after the last button press. The device can be reactivated by pressing
the fire button (instant puff).
English 21