Subscribe to Our Youtube Channel
Related Manuals for Pipeline SERIES-B DNA 75W
Summary of Contents for Pipeline SERIES-B DNA 75W
- Page 1 SERIES-B DNA Instruction Manual Description Operating First setup Functions Features Important Information Advanced Operating Temperature Control EScribe Error Messages Specifications Instruction for use...
-
Page 2: First Setup
Description Operating The SERIES-B DNA 75W by JAC Vapour, is a box mod of the latest generation for use with First setup 18650 batteries. Its spring-loaded 510-connector as well as a wide range of features such as Follow these steps to set up your SERIES-B reverse polarity protection, onboard tempera- DNA 75W, don’t miss a step! - Page 3 2 seconds, Repeat to unlock the power output again. while the device is locked. The fixation of the This allows you to use the SERIES-B DNA 75W initial resistance than will be displayed as a without accidentally adjusting the power output lock-symbol besides the resistance value [Ω].
- Page 4 Standby If not used for more than 10 seconds, the OLED Handling of Lithium-Ion cells (Li-Ion) screen of your SERIES-B DNA 75W will dim. When left unused for further 20 seconds, it will Do not short-circuit Li-Ion cells. When enter standby mode and the screen will switch storing or transporting individual cells itself off.
-
Page 5: Advanced Operating
Than clean the 510–connector with a lint-free should be cleaned regularly with alcohol. cleaning rag. In case of heavy soilings you can With the SERIES-B DNA 75W you can find the moisten the cleaning rag with a tiny amount of optimum temperature and thus the optimum alcohol. - Page 6 As you’ve already seen in this manual, Linking the device the SERIES-B DNA 75W is fitted with Evolv’s Start EScribe firstly than link your SERIES-B DNA DNA 75 PCB, a very powerful and adaptable 75W to the PC via the included Micro-USB chipset, which leaves barely anything to be charging lead.
-
Page 7: Error Messages
When the upload has finished the link between suitable CSV-files for the import into Escribe as your device and the PC can be removed. download: The new wire type can now be selected on the device. http://pipeline-store.com/manual/ JACVAPOUR/Dicodes-Resistherm.csv http://pipeline-store.com/manual/ JACVAPOUR/GG-Zirkonium.csv Error Messages „CHECK ATOMIZER“... - Page 8 „SHORTED“ „TEMPERATURE PROTECTED“ The atomizer was shorted by sliping as well as burning out the coil or by loose connections The selected temperature [C│F] was reached (threads, fittings) inside the atomizer during during firing. In this case the power output firing.
-
Page 9: Specifications
„TOO HOT“ Specifications The temperture measured by the PCB has reached a maximum. In this case the power Output Power 1,0 - 75,0 W output will be locked automatically to avoid heat damage. Output Voltage 0,2 - 6,2 V Avoid any usage of the device for not less Output Current 30,0 A than 10 minutes! If the error message... - Page 10 Possible addictive properties Instruction for use If you are using eLiquid in your PIPELINE eCigarette that contains nicotine please be General Information aware of the following notice: „Nicotine is a highly addictive substance.“ Sale, transfer to or use of eCigarettes by mi- nors under the age of 18 years is prohibited.
Need help?
Do you have a question about the SERIES-B DNA 75W and is the answer not in the manual?
Questions and answers