Button Lock; Switching Profiles - Pipeline BOX DNA60C Instructions For Use Manual

BUTTON LOCK

To prevent accidental button presses (e.g., during transport), you can activate the button
lock. To do this, press the fire button 3 times in quick succession. Repeat the process to
unlock the buttons.
MENU
You can access the menu of the PIPELINE BOX DNA60C by pressing one of the
navigation buttons. The currently selected menu item will be highlighted in blue.
To access a submenu or adjust a value, first highlight the desired menu item and then
press the fire button.
You can then scroll through the submenu or change the value using the navigation
buttons. Confirm your selection by pressing the fire button again.

SWITCHING PROFILES

The PIPELINE BOX DNA60C offers 8 pre-configured profiles that can be used to save
settings for specific atomizer configurations. To switch between profiles, first select the
currently chosen profile in the menu (e.g., "Watt"). Confirm the selection by pressing the
fire button.
You can then use the navigation buttons to choose the desired profile and confirm it with
the fire button.
22 English
TEMPERATURE CONTROL (TC)
To use a TC profile on your PIPELINE BOX DNA60C (e.g., "NiFe30, SS316L, Titanium"),
a calibration of the baseline resistance [Ω] must be performed before using a new
atomizer configuration for the first time. When an atomizer is attached to the device and
a TC profile is already active, a prompt will appear on the display: "New Coil?"
Ensure that you only calibrate with a cold atomizer (at room temperature);
otherwise, the displayed temperature [F/C] may significantly differ from the actual
temperature!
REPLAY
With the new Replay function, you can easily save the "perfect puff" and use it for all
subsequent puffs. Additionally, this function can reliably prevent "dry hits."
To use this feature, select the Replay icon (XXX) in the menu right after taking your
desired puff and press the fire button (the duration of the puff does not matter).
The icon will then turn green, and all subsequent puffs will be delivered with the same
power curve as the saved puff. Select the Replay icon again to deactivate the function.
Please note that the Replay function requires the use of temperature-sensitive
wires (e.g., nickel, stainless steel, titanium). If the function cannot be activated,
the currently used wire is not compatible!
English 23