1. Manuals
  2. Brands
  3. LF Manuals
  4. Fan
  5. Harbor Breeze SALEM 42475
  6. Instruction manual

LF Harbor Breeze SALEM 42475 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HARBOR BREEZE and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.
Purchase Date _________________________
Thank you for purchasing this HARBOR BREEZE product.
Questions, problems, or missing parts?
Before returning, contact us at:
888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday or at ascs@lowes.com.
SG25029
SALEM CEILING FAN
ATTACH YOUR RECEIPT HERE
1
ITEM #3856485
MODEL #42475
Español p. 18
RATED
FOR DAMP
LOCATIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Harbor Breeze SALEM 42475 and is the answer not in the manual?

Questions and answers

Related Manuals for LF Harbor Breeze SALEM 42475

Summary of Contents for LF Harbor Breeze SALEM 42475

  • Page 1 MODEL #42475 SALEM CEILING FAN ATTACH YOUR RECEIPT HERE Español p. 18 HARBOR BREEZE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved. RATED FOR DAMP LOCATIONS Purchase Date _________________________ Thank you for purchasing this HARBOR BREEZE product.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Package Contents ..............3 Hardware Contents .

  • Page 3: Package Contents

    PACKAGE CONTENTS PART DESCRIPTION QUANTITY Mounting Bracket Mounting Bracket Scew (preassembled to Mounting Bracket [A]) Canopy (preassembled to Motor Assembly [D]) Motor Assembly Fitter Plate (preassembled to Motor Assembly [D]) Fitter Plate Screw (preassembled to Fitter Plate [E]) Blade Arm Blade Light Pan Screw Cap (preassembled to Light Cage [K])

  • Page 4: Hardware Contents

    HARDWARE CONTENTS (shown actual size) Wire Connector Blade Screw Blade Washer Pull Chain Motor Screw Qty. 3 Qty. 15 Qty. 15 Extension Qty. 15 + 1 extra + 1 extra + 1 extra Qty. 2 + 1 extra...

  • Page 5: Safety Information

    SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit breakers. • Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199.

  • Page 6: Preparation

    SAFETY INFORMATION CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present. CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are secured. CAUTION: This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1) This device may cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 7: Initial Installation

    INITIAL INSTALLATION 1. Turn off the circuit breakers and the wall switch to the fan supply line leads. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. This fan is intended for Flushmount Installation. Standard Mounting, Angle Mounting, and Closemount installations are not available.
  • Page 8 INITIAL INSTALLATION 4. Loosen all four mounting bracket screws (B), then completely remove two mounting bracket screws (B). Set them aside for later use. 5. Feed the supply wires from the outlet box through the Outlet Box center hole in the mounting bracket (A). Then, secure the mounting bracket (A) to the outlet box (not included) using screws and washers provided with the outlet box.

  • Page 9: Wiring

    WIRING WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12-gauge and/or there is more than one house wire to connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

  • Page 10: Final Installation

    FINAL INSTALLATION 1. Slide the canopy (C) over the mounting bracket (A), aligning the slotted holes in the canopy (C) with the Slotted Hole previously loosened mounting bracket screws (B) in the mounting bracket (A). Twist the canopy (C) clockwise to lock.
  • Page 11 FINAL INSTALLATION 4. Remove the four screw caps (J) from the bottom edge of the light pan (I). Remove the light cage (K) from the light pan (I) and save the screw caps (J) for later. 5. Remove one and loosen the other two fitter plate screws (F) but do not remove from fitter plate (E).
  • Page 12 FINAL INSTALLATION 7. Install the bulbs (N) into the sockets of the light kit (M). Important: Make sure you allow the bulbs (N) and light kit (M) to cool before you replace the bulbs (N). 8. Reattach the light cage (K) to the light pan (I) using the screw caps (J).

  • Page 13: Operating Instructions

    OPERATING INSTRUCTIONS 1. The fan pull chain has four positions to control fan speed. One pull is HIGH, two is MEDIUM, three is LOW and four turns the fan OFF. The light pull chain has two positions to control the light, ON and OFF.

  • Page 14: Care And Maintenance

    CARE AND MAINTENANCE At least twice each year, tighten all screws on the fan. Clean the motor housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean the blades with a lint-free cloth. Bulb Replacement: Use 60-watt max. E26-base LED, CFL or incandescent bulbs. Halogen bulbs are not recommended for this item.
  • Page 15 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1. The blades are loose. 1. Check and tighten all screws that hold the fan blades to the blade arms and the motor. 2. There is a cracked blade. 2. Replace the cracked blade. 3.

  • Page 16: Limited Lifetime Warranty

    LIMITED LIFETIME WARRANTY The manufacturer warrants this fan to be free from defects in workmanship and materials present at time of shipment from the factory for a lifetime from the date of purchase by the original purchaser. The retailer also warrants that all other fan parts, excluding any glass or plastic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.

  • Page 17: Replacement Parts List

    REPLACEMENT PARTS LIST For replacement parts, call the customer service department at 888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at ascs@lowes.com. PART DESCRIPTION #3856485 COVERED UNDER WARRANTY Mounting Bracket 4L000015480 YES - 1 year Blade Arm (x5) 4L074490001 YES - 1 year...

This manual is also suitable for:

3856485

Table of Contents