VEVOR CY-SF13 Manual

Asphalt Rake
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
01
Important Information:
Please read these instructions thoroughly before use.
Please read these instructions thoroughly before use.
Failure to follow instructions may result in equipment
damage, malfunction, or even injury or death to person-
nel.
Warning
• The Rake is designed for cutting submerged, partially
emergent, or emergent aquatic vegetation from under-
water. Any other use is strictly prohibited. Before using
the Rake, please read this manual carefully to under-
stand the proper use of the unit.
• The Rake teeth have sharp edges.
SAFETY FIRST:
Keep out of reach of children.
Do not use it with children in the immediate area.
IMPORTANT: We are not responsible for equipment
damage or failure, losses, injury, or death resulting from
failure to follow safety precautions, misuse, or abuse of
equipment.
Assembly Instructions
Step 1
The Rake teeth Assembly: The Rake teeth Assembly:
Align the mounting holes in the middle of the rake teeth
and the head of the connecting rod, insert the M6*40
screw, and then use the nut. Note that you do not need
to tighten the nut at this time.
02
Step 2
Connecting rod Assembly: Align the mounting holes
on both sides of the rake teeth with the mounting holes
on the connecting rod, insert M6*12 screws, and screw
in the nuts. Note that you do not need to tighten the nut
at this time.
Step 3
Connecting rod and Middle Pole Assembly: Align
the mounting hole of the connecting rod and middle
pole, insert M6*40 screws, and screw in the nut.
Step 4
Tighten all screws from step1 to step3
Step 5
Handle Assembly:Press the spring-loaded buttons
on one end of the handle connector and slide it halfway
into one of the handles and rotate it until the buttons
snap into the holes in the handle.
Repeat this process for the other half of the handle.
03