Page 1
Original Instructions Version 1 April 2024 ELECTRONIC STETHOSCOPE 24701...
Page 2
User Manual for: Electronic Stethoscope Stock No: 24701 Part No: ETES Read this manual in full before using this product and retain it for future use. Always use the latest version of the manual. Please visit drapertools.com/manuals for the latest version.
Any other application beyond the conditions established the source of automotive noises & vibrations. Useful for for use will be considered misuse. Draper Tools accepts no fault finding on engines, gearboxes and bearings when responsibility for improper use of this product.
3. Health and Safety Information Important: Read all the Health and Safety instructions before attempting to operate, maintain or repair this product. Failure to follow these instructions may result in injury or damage to the user, the product or the vehicle. WARNING! Ensure that all Health &...
Page 5
If any part is occurred during shipment. damaged or missing, do not attempt to use the product. Please contact the Draper Helpline; contact details can be found at the back of this manual. Test probe...
6. Installing the battery 1. Unclip the battery compartment and fit 1X 9V battery (not supplied). • Ensure the correct +/- orientation. • If the indicator light (6) is not on replace the battery. Fig. 4 3. Rotate the thumb wheel (5) to turn on the probe and adjust the volume –...
8. Maintenance, Storage and Disposal • Wipe the case with a damp cloth and a mild detergent. DO NOT use solvents or abrasives to clean the tester. • At the end of its working life, dispose of the product responsibly and in line with local Regulations. Recycle where possible.
Need help?
Do you have a question about the ETES and is the answer not in the manual?
Questions and answers