Draper 43618 Instructions For Use

1. Scope
This product is designed to measure the moisture level in
sawn timber, paper, cardboard and hardened materials
such as mortar, concrete and plaster. It may also be used to
measure the ambient temperature. Part of our core range,
this product is suitable for regular use by enthusiasts and
tradespersons alike.
Important: This product is intended as a guide only. For
precise results, specially engineered equipment should be
used.
Read this manual in full before attempting to use this
product and retain it for later use. Always use the latest
version of the manual.
2. Specification
Stock No. 43618
Part No. MM100
Measurement range:
Wood: 6–42%
Hardened
materials: 0.2–2%
Ambient
temperature: 0–40°C
Accuracy:
Wood: ±2% at <30%
Hardened
materials: ±0.1% at <1.4% ±0.2% at ≥1.4%
Power supply: 1.5V (4 x LR44, supplied)
Gross weight: 0.05kg
Dimensions: W 40 x H 80 x D 20mm
Helpline: +44 (0) 23 8049 4344
General Enquiries: +44 (0) 23 8026 6355
Draper Tools Limited, Hursley Road, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF, UK
MOISTURE METER
43618 – MM100 INSTRUCTIONS FOR USE
3. Warranty
Should the tool develop a fault, return the complete tool to
your nearest distributor or contact Draper Tools directly.
Proof of purchase must be provided.
If, upon inspection, it is found that the fault occurring is
due to defective materials or workmanship, repairs will be
carried out free of charge. This warranty covers parts and
labour for 12 months from the date of purchase. However,
if the tools are hired out, the warranty period is 90 days
from the date of purchase.
This warranty does not apply to any consumable parts,
batteries or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling,
alterations, accidents, or repairs attempted or made by any
personnel other than the authorised Draper Tools repair
agent.
For full details, visit drapertools.com/warranty
4. Health and Safety Instructions
• DO NOT use this product in wet atmospheric
• Check the device carefully before use.
(32–140°F)
±4% at ≥30%
• Use this product only for its intended purpose and do
• DO NOT immerse this device in water or allow the
• DO NOT abuse, mutilate or burn the battery.
• Keep this product out of reach of children.
Sales Desk: +44 (0) 23 8049 4333
conditions.
− DO NOT use this product if it is damaged in any
way or there is evidence of battery leakage.
− If battery acid comes into contact with your eyes
or skin, flush with plenty of clean water and seek
immediate medical attention.
not modify it in any way.
battery to come into contact with liquids.
Email: sales@drapertools.com
EN
Original Instructions
Version 3 – August 2022
Website: drapertools.com
0822