Advertisement
Source Component Harness Hook-Up:
A second VCP or other A/V
component can be connected to
video monitor system using a
second source component harness
(purchased separately, P/N
8010730). This second harness
would plug into second Mini-Din
connector on main PCB as in
steps 1 and 2 above.
IR LED:
Clean the IR Receiver Window on the front of the VCP.
Remove Adhesive Backing and Apply IR LED to IR
Window on the Face of the VCP.
VCP
(Rear View)
Page 7 of 11
P/N 8010845
Rev.F Nov. 00
Video Out
(Yellow)
Right Out
(Red)
Left Out
(White)
Figure 5
Yellow RCA (Video In)
White RCA (Audio In Left)
Red RCA (Audio In Right)
"Y" Adapter
Power Connector
for use with
(4-pin)
Non-Stereo
Installations
P/N 0892165
Source
Component
Harness
P/N 8010730
Advertisement
