Audiovox LCM1042TV Owner's Manual page 5

FRONT PANEL FEATURES – See Figure 1
1. Power Button – (Bright red when system is ON, dim
when system is OFF).
2. Channel Up/Down – Changes the TV channel.
3. Auto Program – Press this button, the TV will
automatically scan and memorize the strong signal
channels.
4. Sensor Eye – Allows the remote control to operate
the LCM1042TV's
Display), volume to wired headphone jacks (and
optional external speakers), and for control of Video
Cassette Player, DVD Player and other accessories.
5. Three position Dome Light Switch
Auto – Automatically switches on the dome lights
•
in conjunction
illumination.
Off – The dome lights will not turn on in this
•
position.
On – Turns on the dome lights.
•
6. Screen Release – Slide button in the direction of the
arrow to release the drop down screen.
OSD system (On
with the vehicle's
7. TV/AV– Any video equipment connected to the
AUDIO/VIDEO inputs can be used with the TV by
pressing this button. Each time the button is pressed
, the Audio/Video source will change in the following
sequence VIDEO 1, VIDEO 2 and TV.
8. Volume Tuning Up/Down – To raise or lower the
volume level. Also used to adjust the picture control
setting when "contrast", "bright", "color" or "tint" is
Screen
displayed on-screen.
9. Picture Select – To select Contrast, Brightness,
Color and Tint for desired level adjustment. If
adjustments not made within a few seconds, picture
select mode will automatically be cancelled.
interior
10. Dome
illumination.
-5-
Lights – provide additional Interior