Internal Programs; Event Memory - Bosch MAP 5000 User Manual

MAP touch keypad 5000
How to edit the blocking time
The Edit Blocking Time option is only available if the blocking time editing has been enabled
by the installer and during a blocking time interval while disarming is allowed.
1.
2.
3.
4.
5.
6.
ð
How to view the associated areas
4
ð
5.9

Internal programs

Internal programs are configured by the installer and are run or stopped by the user.
An internal program is a list of devices that are selected independently of the area to which
they belong. By running the internal program, these devices are armed internally. That means
that if an alarm is triggered for any of these devices, the alarm is displayed on the keypad, but
not reported to the monitoring station.
Up to 14 internal programs can be configured.
4
How to open the Internal Program menu
4
ð
How to run or stop internal programs
4
ð
5.10

Event memory

The event memory provides access to device event functions.
4
Bosch Security Systems B.V.
Press Edit Blocking Time.
To choose the day for which you want to edit the configured blocking time intervals, use
the Day, Month and Year buttons and the
Blocking time intervals can be edited for the next seven days.
To confirm, press
The blocking time intervals for which disarming is allowed are displayed for the selected
date.
Select the blocking time interval you want to edit.
To edit the blocking time interval, use the Hours, Minutes and Seconds buttons for the
beginning of the blocking time interval (upper row) and for the end of the blocking time
interval (lower row) and the
To confirm, press
A confirmation message is displayed.
The blocking time interval is changed.
Press Associated Areas.
The areas for which the blocking time intervals are configured are displayed.
For more information, contact your installer or system administrator.
To open the Internal Program menu, press
The Internal Program menu with all configured internal programs is displayed.
Press the internal program you want to run or stop. You can also search for internal
programs by name or filter active and inactive internal programs.
The icon indicates that the internal program is running. The
that the internal program is stopped.
For information on how to view system events, such as tampers or faults, refer to Event
history, page 23 .
and the
and the icons.
and
User manual
Operation | en
icons.
icon indicates
2023-03 | V01 | F.01U.408.135
31