Bosch B920 User Quick Reference Manual

1 | Overview
Status indicators
The indicators show how your system is
operating.
Ready to arm
The system is ready to turn on (arm). (24 hour points, such
as fire points, are always monitored.)
On (armed)
The system is on (armed).
Trouble
A trouble condition exists.
Gas
A gas alarm exists.
Power
The system has AC (Mains) power.
Programmable function keys
Hold these keys to activate user functions, (as
configured by your security company) and to turn
on backlighting. The keypad emits the keypress tone
(short beep).
These keys turn on backlighting and emit the keypress
Use [PREV] (previous) and [NEXT] to go through alarm points, lists, and text.
Use [ENTER] after entering your passcode, to select an item, or to enter Yes to
Use [ESC] (Escape) to exit from menus and functions, or to delete letters or numbers.
Use [CMD] with one or two number keys to operate
Use [HELP] to get keypad Help in your display language.
Commands
Command
You can operate functions
[CMD] 0
with the [CMD] key plus one
[CMD] 0 0
or two digits.
[CMD] 1
[CMD] 1 1
Press the [CMD] key, then
enter the command.
[CMD] 2
or
[CMD] 3
[CMD] 4
Press [CMD]. Then use
[CMD] 4 0
[PREV] or [NEXT] to move
through commands. Press
[CMD] 4 1
[ENTER] to activate it.
[CMD] 4 2
[CMD] 4 3
[CMD] 4 4
[CMD] 4 5
[CMD] 4 6
[CMD] 4 7
Alphanumeric display
A1 Lobby
Ready to turn on
GAS
Navigation keys Intrusion function keys
Use these keys to turn on keypad backlighting. The
tone (short beep).
keypress tone (short beep) emits.
PREV and NEXT
ALL
Press to turn the intrusion system All On.
ENTER PART
Press to turn the intrusion system Part On.
a request.
BYPASS
ESC Press to open the menu to bypass points.
MENU
Press to open the keypad's Main menu.
CMD
functions.
HELP
Function Command Function
Bypass [CMD] 4 9 Change Display
Unbypass [CMD] 5 0 Go to Area
All on (with delay) [CMD] 5 1 Extend Close
All On, Instant [CMD] 5 SKED Menu
[CMD] 5 3 Delete User
Part On, Instant
[CMD] 5 4 Output Change Menu
Part On (with delay)
[CMD] 5 5 Change Passcode
Silence Trouble Sounders
See Alarms [CMD] 5 6 Add User
Test Report [CMD] 5 7 Default Text
Status Report [CMD] 5 8 Fire Walk Test
RPS Answer [CMD] 5 9 Show Revision
[CMD] 6 Watch Mode
Intrusion Walk Test
[CMD] 7* Special Alert _____________
Date and Time
Door Control Menu [CMD] 8 Open Main Menu
Reset Sensors [CMD] 9* Special Alert _____________
[CMD] [8] shows the menu tree. Each option has a number. Touch the number for the desired menu, or use [PREV] or [NEXT]
to review your options, and then touch [ENTER] when you see the desired option.
*As configured by your security company.
NOTICE! The Access menu and the option to configure a card are available on compatible security systems only.
Menu tree