Related Manuals for IBASE Technology MI1002 Series
Summary of Contents for IBASE Technology MI1002 Series
- Page 1 MI1002AF ® Intel 14th Gen Core™ Ultra 7/5/3 Mini-ITX Motherboard User’s Manual Version 1.0 (October 2024)
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”). Disclaimer IBASE reserves the right to make changes and improvements to the products described in this document without prior notice.
- Page 3 Compliance This product complies with CE and FCC Class B requirements. In residential areas, additional measures may be required if radio interference is detected. This product has been tested for environmental specifications and limits and complies with the directives of the European Union (EU). Users should also follow local regulations to prevent any interference or disruptions caused by the product's operation.
-
Page 4: Important Safety Information
Important Safety Information Carefully read the precautions before using the board. Environmental conditions: • Use this product in environments where the ambient temperature ranges as between 0˚C and 60˚C. Care for your IBASE products: • Before cleaning the PCB, unplug all cables and remove the battery. •... -
Page 5: Warranty Policy
Warranty Policy • IBASE standard products: 24-month (2-year) warranty from the date of shipment. If the date of shipment cannot be ascertained, the product serial numbers can be used to determine the approximate shipping date. • -party parts: 12-month (1-year) warranty from delivery for the 3 -party parts that are not manufactured by IBASE, such as CPU, CPU cooler, memory, storage devices, power adapter, panel and touchscreen. -
Page 6: Table Of Contents
Table of Contents Chapter 1 General Information ..........1 Introduction .................... 2 Features ....................2 Packing List ................... 3 Optional Accessories ................3 Specifications ..................4 Block Diagram ..................6 Product View ..................7 Board Dimensions ................10 Chapter 2 Hardware Configuration ........ - Page 7 2.5.17 M.2 B-key 3052 Slot (J19) ............28 2.5.18 SATA Power Connector (J16) ..........29 2.5.19 Audio Pin Header for Chassis Front Panel (J22) ....30 2.5.20 DC-In Power Connector (J23) ..........31 2.5.21 SATA III Connector (SATA1, SATA2) ........31 2.5.22 Fan Power Connectors (CPU_FAN1, SYS_FAN1) ....
- Page 8 This page is intentionally left blank. viii MI1002AF User Manual...
-
Page 9: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Optional Accessories • Specifications • Block Diagram • Product View • Board Dimensions... -
Page 10: Introduction
Introduction The MI1002AF Mini ITX motherboard is based on Intel® Core Ultra 7/5/3 processors. With support for two DDR5 slots accommodating up to 64GB memory, it supports independent displays with HDMI (2.0a) and 1x DisplayPort(1.4a) (DP++) interface. This high-performance platform meets demands in next-generation applications in imaging, AI, and edge computing. -
Page 11: Packing List
General Information Packing List Your MI1002AFpackage should include the items listed below. If any of the items below is missing, contact the distributor or dealer from whom you purchased the product. • MI1002 • IO Shield • SATA cable • COM cable •... -
Page 12: Specifications
Specifications Model LGA1851 Mini-ITX Motherboard w /HDMI, DisplayPort, MI1002AF 3 x 2.5GbE, 2 x SATA, iAMT (18.0), fTPM Specifications CPU Socket LGA1851 Gen Intel® Core™ Ultra 7/5/3 CPU 2x DDR5 SO-DIMM sockets Memory Supports DDR5-5600 module, Max. 64GB BIOS Watchdog Timer 256 levels Hardware Monitor SATA III &... - Page 13 General Information Physical Dimensions 170mm x 170mm (6.7“x 6.7“) (L x W) Environmental Operating 0 ~ 60 °C (32 ~ 140 °F) Temperature Storage -20 ~ 80 °C (-4 ~ 176 °F) Temperature All specifications are subject to change without prior notice. MI1002AF User Manual...
-
Page 14: Block Diagram
Block Diagram MI1002AF User Manual... -
Page 15: Product View
General Information Product View Top View MI1002AF User Manual... - Page 16 Bottom View MI1002AF User Manual...
- Page 17 General Information Rear View Function 1. CN1 COM1 & COM2 RS-232/422/485 Ports 2. CN2 DisplayPort & HDMI Port 3. CN3, CN5 USB Type-C Connector 4. CN4, CN6 2.5 Gigabit LAN (Intel I226-V) + USB 3.2 5. CN7 2.5 Gigabit LAN (Intel I226-LM) + USB 3.2 6.
-
Page 18: Board Dimensions
Board Dimensions MI1002AF User Manual... -
Page 19: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration This section provides information on jumper settings and connectors on the MI1002AFand other installation information in order to set up a workable system. The topics covered are: • Essential installations • Jumper and connector locations • Jumper settings and information of connectors... -
Page 20: Essential Installations
Essential Installations Follow the instructions below to install the memory modules. 2.1.1 Installing the Memory To install the modules, locate the memory slot on the board and perform the following steps: Align the key of the memory module with that on the memory slot and insert the module slantwise. -
Page 21: Setting The Jumpers
Hardware Configuration Setting the Jumpers Set up and configure your MI1002AF by using jumpers for various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your use. 2.2.1 How to Set Jumpers Jumpers are short-length conductors consisting of several metal pins with a non-conductive base mounted on the circuit board. -
Page 22: Jumper & Connector Locations
Jumper & Connector Locations MI1002AF User Manual... -
Page 23: Jumpers Quick Reference
Hardware Configuration Jumpers Quick Reference Jumper Function JBAT1 Clear CMOS JME1 Clear ME AT/ATX Select Sierra EM919x 5G card USB/PCIe Select 2.4.1 Clear CMOS Contents (JBAT1) Function Pin closed Illustration Normal Clear CMOS MI1002AF User Manual... -
Page 24: Clear Me Contents (Jme1)
2.4.2 Clear ME Contents (JME1) Function Pin closed Illustration Normal Clear ME 2.4.3 ATX & AT Power Mode Selection (JP1) Function Pin closed Illustration (default) MI1002AF User Manual... -
Page 25: Sierra Em9191 5G Card Usb/Pcie Select (Jp3)
Hardware Configuration 2.4.4 Sierra EM9191 5G Card USB/PCIe Select (JP3) Function Pin closed Illustration PCIe (default) MI1002AF User Manual... -
Page 26: Connectors Quick Reference
Connectors Quick Reference Connector Function COM1 & COM2 RS-232/422/485 Ports DisplayPort & HDMI Port CN3, CN5 USB Type-C Connector 2.5 Gigabit LAN (Intel I226-V) + USB 3.2 2.5 Gigabit LAN (Intel I226-LM) + USB 3.2 2.5 Gigabit LAN (Intel I226-V) + USB 3.2 HD Audio Connector J2, J5 COM3 &... -
Page 27: Com1 & Com2 Rs-232/422/485 Ports (Cn1)
Hardware Configuration 2.5.1 COM1 & COM2 RS-232/422/485 Ports (CN1) Signal Name Signal Name DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground COM1/COM2 RS-232/422/485 are jumperless, configurable in BIOS. -
Page 28: Displayport & Hdmi Port (Cn2)
2.5.2 DisplayPort & HDMI Port (CN2) 2.5.3 USB Type-C Connector (CN3, CN5) MI1002AF User Manual... -
Page 29: Gigabit Lan (Intel I226-V) + Usb3.2 (Cn4, Cn6)
Hardware Configuration 2.5.4 2.5 Gigabit LAN (Intel I226-V) + USB3.2 (CN4, CN6) 2.5.5 2.5 Gigabit LAN (Intel I226-LM) + USB3.2 (CN7) 2.5.6 HD Audio Connector (CN8) MI1002AF User Manual... -
Page 30: Front Panel Settings Connector (J3)
2.5.7 Front Panel Settings Connector (J3) Signal Signal Power BTN- Power BTN+ HDD LED+ HDD LED- Reset BTN- Reset BTN+ Power LED+ Power LED- J3 is utilized for system indicators to provide light indication of the computer activities and switches to change the computer status. It provides interfaces for the following functions: ATX Power ON Switch (Pins 1 and 2) The 2 pins make an “ATX Power Supply On/Off Switch”... -
Page 31: Com3 (J2) & Com4 (J5) Rs-232 Ports
Hardware Configuration 2.5.8 COM3 (J2) & COM4 (J5) RS-232 Ports Signal Name Signal Name DCD, Data carrier RXD, Receive data detect DTR, Data terminal TXD, Transmit data ready Ground DSR, Data set ready RTS, Request to CTS, Clear to send send RI, Ring indicator Not Used... -
Page 32: Ddr5 So-Dimm Slot (J6 / J10)
2.5.9 DDR5 SO-DIMM Slot (J6 / J10) 2.5.10 SPI Flash Connector (J7) Note: J7 is for factory use only. MI1002AF User Manual... -
Page 33: Port Debug (J8)
Hardware Configuration 2.5.11 80 Port Debug (J8) Note: J8 is for factory use only. 2.5.12 Digital I/O Connector (J11) Signal Signal Ground +5V(0.5A) OUT3 OUT1 OUT2 OUT0 MI1002AF User Manual... -
Page 34: M2280 Slot (J12)
2.5.13 M.2 M2280 Slot (J12) *J12 supports NVME 2.5.14 M.2 E2230 Slot (J13) *J13 supports USB2.0 & PCIE x1 MI1002AF User Manual... -
Page 35: Usb 2.0 Connector (J14, J15)
Hardware Configuration 2.5.15 USB 2.0 Connector (J14, J15) * Connector type: DF11-8S-PA66H Signal Signal VCC(0.5A) Ground Ground VCC(0.5A) MI1002AF User Manual... -
Page 36: Sim Slot (J18)
2.5.16 SIM Slot (J18) 2.5.17 M.2 B-key 3052 Slot (J19) *J19 supports Sierra EM9191 5G modules. MI1002AF User Manual... -
Page 37: Sata Power Connector (J16)
Hardware Configuration 2.5.18 2.5.18 SATA Power Connector (J16) Signal Name Signal Name Ground Ground +12V MI1002AF User Manual... -
Page 38: Audio Pin Header For Chassis Front Panel (J22)
2.5.19 Audio Pin Header for Chassis Front Panel (J22) Signal Name Signal Name MIC IN_L Ground MIC IN_R LINE_R Sense Ground Sense LINE_L Sense Ground MI1002AF User Manual... -
Page 39: Dc-In Power Connector (J23)
Hardware Configuration 2.5.20 DC-In Power Connector (J23) Signal Name Signal Name Ground Ground +12 ~ +24V +12 ~ +24V 2.5.21 SATA III Connector (SATA1, SATA2) MI1002AF User Manual... -
Page 40: Fan Power Connectors (Cpu_Fan1, Sys_Fan1)
2.5.22 Fan Power Connectors (CPU_FAN1, SYS_FAN1) Signal Name Ground +12V Rotation detection Control 2.5.23 PCIe (x4) Slot (PCIE1) MI1002AF User Manual... -
Page 41: Chapter 3 Drivers Installation
BIOS Setup Chapter 3 Drivers Installation This chapter introduces installation of the following drivers: • ® Intel Chipset Software Installation Utility • HD Graphics Drivers • Smartsound Drivers • HD Audio Drivers • LAN Drivers • ® Intel ME Drivers •... -
Page 42: Introduction
Introduction This section describes the installation procedures for software and drivers. Note: After installing your Windows operating system, you must install the ® Intel Chipset Software Installation Utility first before proceeding with the drivers installation. ® Intel Chipset Software Installation Utility ®... - Page 43 BIOS Setup Click Intel(R) Chipset Software Installation Utility. ® When the Welcome screen to the Intel Chipset Device Software appears, click Next to continue. Accept the terms in the software license agreement. On the Readme File Information screen, click Install. After completing the installation, click Finish to complete the setup process.
-
Page 44: Vga Driver Installation
VGA Driver Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) HD Graphics Driver. Click Begin installation. Click I agree in the INTEL SOFTWARE LICENSE AGREEMENT screen. Click Start for the installer to install the following components: - Intel Graphics Driver - Intel Graphics Command Center When installation has been completed, click Finish. -
Page 45: Intel(R) Smartsound Drivers Installation
BIOS Setup Intel(R) Smartsound Drivers Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) Smartsound Drivers on the right page. Run the file in the path shown below for the InstallShield Wizard to start and complete the installation of the Intel Smartsound drivers. -
Page 46: Hd Audio Driver Installation
HD Audio Driver Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Realtek Audio Drivers. Click Realtek Audio DCH Drivers. Click Next when the Welcome to the InstallShield Wizard for Realtek Audio Driver screen appears. -
Page 47: Lan Driver Installation
LAN Driver Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) PRO LAN Network Drivers.. On the Intel® Network Connections screen, click Install Drivers and Software. When the Welcome to the install wizard for Intel(R) Network Connections screen appears, click Next. -
Page 48: Intel® Me Drivers Installation
Intel® ME Drivers Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) ME Drivers. When the Welcome screen appears, click Next. Accept the terms in the license agreement and click Next. In the Destination Folder screen, click Next to install to the default folder, or click Change to choose another destination folder. -
Page 49: Intel® Serial Io Drivers Installation
Intel® Serial IO Drivers Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) Serial IO Drivers. When the Welcome screen appears, click Next. Accept the terms in the license agreement and click Next. In both the Readme File Information and Confirmation screens, click Next. -
Page 50: Intel® Pmt Drivers Installation
Intel® PMT Drivers Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) PMT Drivers. Run the file in the path shown below for the InstallShield Wizard to start and complete the installation of the Intel PMT drivers. When installation has been completed, press any key to continue. -
Page 51: Intel® Npu Io Drivers Installation
3.10 Intel® NPU IO Drivers Installation Click Intel on the left pane and then Intel(R) Meteor Lake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) NPU IO Drivers. Run the file in the path shown below for the InstallShield Wizard to start and complete the installation of the drivers. - Page 52 This page is intentionally left blank. MI1002AF User Manual...
-
Page 53: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Security Settings • Boot Settings •... -
Page 54: Introduction
4.1 Introduction The BIOS (Basic Input/Output System) installed in the ROM of your ® computer system supports Intel processors. The BIOS provides critical low-level support for standard devices such as disk drives, serial ports and parallel ports. It also provides password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. -
Page 55: Main Settings
BIOS Setup 4.3 Main Settings BIOS Setting Description Sets the date. Use the <Tab> key to switch System Date between the Date elements. Set the time. Use the <Tab> key to switch System Time between the Time elements. MI1002AF User’s Manual... -
Page 56: Advanced Settings
4.4 Advanced Settings This section allows you to configure system features according to your preference. MI1002AF User’s Manual... -
Page 57: Cpu Configuration
BIOS Setup 4.4.1 CPU Configuration BIOS Setting Description Efficient/Performance- Displays the E-core / P-core Information core Information Intel (VMX) When enabled, a VMX can utilize the Virtualization additional hardware capabilities provided by Technology Vanderpool Technology. Active Performance Number of P-cores to enable in each Cores processor package. -
Page 58: Power & Performance
4.4.2 Power & Performance BIOS Setting Description CPU - Power CPU - Power Management Control Options Management Control Allows more than two frequency ranges to be Intel Speedstep supported Enable/Disable Intel Speed Shift Technology Intel Speed Shift support. Enabling will expose the CPPC v2 Technology interface to allow for hardware controlled P- states. - Page 59 BIOS Setup 4.4.3 System Agent (SA) Configuration MI1002AF User’s Manual...
-
Page 60: Pch-Io Configuration
4.4.4 PCH-IO Configuration MI1002AF User’s Manual... - Page 61 BIOS Setup 4.4.5 PCH-FW Configuration MI1002AF User’s Manual...
-
Page 62: Trusted Computing
4.4.6 Trusted Computing BIOS Setting Description Enables / Disables BIOS support for security device. Security Device OS will not show security device. TCG EFI protocol Support and INT1A interface will not be available. SHA256/384, SM3_256 PCR Enables / Disables PCR Bank. Bank Schedule an operation for the security device. -
Page 63: Acpi Settings
BIOS Setup 4.4.7 ACPI Settings BIOS Setting Description Enables / Disables the system ability to Enable Hibernation hibernate (OS/S4 Sleep State). This option may be not effective with some OS. MI1002AF User’s Manual... - Page 64 4.4.8 F81964 Super IO Configuration MI1002AF User’s Manual...
-
Page 65: Hardware Monitor
BIOS Setup 4.4.9 Hardware Monitor BIOS Setting Description CPU Smart Fan Enables / Disables smart fan control. Control These fields are the parameters of the hardware monitoring function feature of the Temperatures / motherboard. The values are read-only values Voltages as monitored by the system and show the PC health status. -
Page 66: Usb Configuration
4.4.10 USB Configuration BIOS Setting Description This is a workaround for OSes without XHCI XHCI Hand-off hand-off support. The XHCI ownership change should be claimed by XHCI driver. USB Mass Storage Enables / Disables the support for USB mass Driver Support storage driver. -
Page 67: Network Stack Configuration
BIOS Setup 4.4.11 Network Stack Configuration BIOS Setting Description Network Stack Enable/Disable UEFI Network Stack If disabled, IPv4 PXE boot support will not be IPv4 PXE Support available. If disabled, IPv4 HTTP boot support will not be IPv4 HTTP Support available. -
Page 68: Nvme Configuration
4.4.12 NVMe Configuration MI1002AF User’s Manual... -
Page 69: Security Settings
BIOS Setup 4.5 Security Settings BIOS Setting Description Setup Administrator Sets an administrator password for the setup Password utility. User Password Sets a user password. Secure Boot feature is Active if Secure Boot is enabled. Platform Key(PK) is enrolled and the Secure Boot system is in user mode. -
Page 70: Boot Settings
4.6 Boot Settings BIOS Setting Description Setup Prompt Number of seconds to wait for setup activation Timeout key. 65535 (0xFFFF) means indefinite waiting. Bootup NumLock Selects the keyboard NumLock state. State Quiet Boot Enables / Disables Quiet Boot option. FIXED BOOT Sets the system boot order. -
Page 71: Save & Exit Settings
BIOS Setup 4.7 Save & Exit Settings BIOS Setting Description Save Changes and Exits system setup after saving the changes. Exit Discard Changes Exits system setup without saving any and Exit changes. Save Changes and Resets the system after saving the changes. Reset Discard Changes Resets system setup without saving any... -
Page 72: Mebx
4.8 MEBx MI1002AF User’s Manual... -
Page 73: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. -
Page 74: I/O Port Address Map
I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address Device Description 0x0000EFA0-0x0000EFBF Intel(R) SMBus - 7E22 0x00000A00-0x00000A0F Motherboard resources 0x00000A10-0x00000A1F... - Page 75 Appendix Address Device Description 0x00000028-0x00000029 Programmable interrupt controller 0x0000002C-0x0000002D Programmable interrupt controller 0x00000030-0x00000031 Programmable interrupt controller 0x00000034-0x00000035 Programmable interrupt controller 0x00000038-0x00000039 Programmable interrupt controller 0x0000003C-0x0000003D Programmable interrupt controller 0x000000A0-0x000000A1 Programmable interrupt controller 0x000000A4-0x000000A5 Programmable interrupt controller 0x000000A8-0x000000A9 Programmable interrupt controller 0x000000AC-0x000000AD Programmable interrupt controller 0x000000B0-0x000000B1...
-
Page 76: Interrupt Request Lines (Irq)
Interrupt Request Lines (IRQ) The following table shows the IRQ used by the devices on board. Level Function IRQ 4294967286~84 Intel(R) Ethernet Controller I226-LM IRQ 4294967292 PCI Express Root Port IRQ 4294967289 Standard SATA AHCI Controller IRQ 4 Communications Port (COM1) IRQ 3 Communications Port (COM2) IRQ 5... -
Page 77: Watchdog Timer Configuration
Appendix Watchdog Timer Configuration The Watchdog Timer (WDT) is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. - Page 78 bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); } else DisableWDT(); } return 0; //--------------------------------------------------------------------------- void EnableWDT(int interval) unsigned char bBuf; bBuf = Get_F81964_Reg(0x2B); bBuf &= (~0x20); Set_F81964_Reg(0x2B, bBuf); //Enable WDTO Set_F81964_LD(0x07); //switch to logic device 7 Set_F81964_Reg(0x30, 0x01);...
- Page 79 Appendix // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. //--------------------------------------------------------------------------- #include "F81964.H" #include <dos.h>...
- Page 80 //--------------------------------------------------------------------------- void Set_F81964_Reg( unsigned char REG, unsigned char DATA) Unlock_F81964(); outportb(F81964_INDEX_PORT, REG); outportb(F81964_DATA_PORT, DATA); Lock_F81964(); //--------------------------------------------------------------------------- unsigned char Get_F81964_Reg(unsigned char REG) unsigned char Result; Unlock_F81964(); outportb(F81964_INDEX_PORT, REG); Result = inportb(F81964_DATA_PORT); Lock_F81964(); return Result; //--------------------------------------------------------------------------- //--------------------------------------------------------------------------- // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE.
-
Page 81: Onboard Connector Types
Appendix Onboard Connector Types Compatible Mating Function Connector Onboard Type Type for Reference DC-In Power Hao Guo Xing Ye Molex Connector ATX4PT-NY46 39-01-2040 USB 2.0 Hao Guo Xing Ye Hirose J14, J15 Connector DF11-8S-PA66H DF11-8DS-2C SATA Power Hao Guo Xing Ye Connector WAFER25-104S-2442-ST 171822-4... -
Page 82: Mi1002Af Usb Power Control Bit Mapping
MI1002AF USB Power Control Bit Mapping. Function Connector Software Mapping M.2 –E Key bit_3 USB3 CN7 (A, B) bit_4 MI1002AF User Manual...
Need help?
Do you have a question about the MI1002 Series and is the answer not in the manual?
Questions and answers