TRIOBIKE HAFNIA Installation Manual
Hood installation
Hide thumbs
Also See for HAFNIA:
- Original instructions manual (19 pages) ,
- Assembly instructions manual (6 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for TRIOBIKE HAFNIA
Summary of Contents for TRIOBIKE HAFNIA
- Page 1 HAFNIA HOOD INSTALLATION MANUAL ENGLISH V 1.3...
- Page 2 HOOD PARTS TRIOBIKE MODEL: XXX QR code - scan to download the manual 1x hood fabric rear front 2x hood frame side tubes - rear part 2x hood frame side tubes - front part 2x hood frame longitudinal bridge foam grips...
-
Page 3: Installing The Hood
INSTALLING THE HOOD Open the box and place all the parts on a flat and clean surface. Insert the hood frame on the bike box: the frame has to enter into the tubes marked Take the 4 bent tubes and connect them as shown on the picture above, using 1x M6x15 with the red circles. - Page 4 INSTALLING THE HOOD INSTALLING THE HOOD Connect the 2 parts of the longitudinal mid bridge as shown on the picture above, using 1x M6x15 bolt each. Slide the foam grip on the longitudinal bridge front part, place it as shown above. Take the 2 straight bars and fix them to the side frame tubes with the 4x DIN7380 M6x27 Slide the foam grip on the longitudinal bridge rear part, place it as shown above.
- Page 5 INSTALLING THE HOOD INSTALLING THE HOOD 90° Connect the longitudinal mid bridge to the transversal ones, using 2x M6x27 bolts. The part with the sharpest bend goes to the rear. THE ANGLE BETWEEN LONGITUDINAL AND TRANSVERSAL BRIDGES MUST BE 90°, THE BOLTS HAVE TO ENTER EASILY. Unfold the soft cover and place it on the hood frame.
- Page 6 INSTALLING THE HOOD TITLE TRIOBIKE A/S Vesterbrogade 149, 1620 Copenhagen V - Denmark phone: +45 3670 0070 info@triobike.dk | www.triobike.com Close all the snaps located around the hood cover.
Need help?
Do you have a question about the HAFNIA and is the answer not in the manual?
Questions and answers