NEC Xen Topaz User Manual page 4

Placing Calls Quickly
Last Number Redial <for outside and intercom calls>
#
Intercom numbers can also be stored under Last Number Redial. (System programming is required. Ask
your NEC Authorised Supplier for details.)
If your call doesn't go through...
Setting Camp On / Callback / Trunk Queuing
0
(Hear Busy Tone,
No Answer, or
Trunk Unavailable)
<Camp On> For Intercom Call, when you hear ringing, wait for the called party to answer.
For Trunk Queuing, when you hear Dial Tone, begin dialling the telephone number.
<Callback> For Intercom Call, when your phone starts the ringing, lift handset and wait for the called
party to answer.
For Trunk Queuing, when your phone starts the ringing, lift handset, hear Dial Tone and
begin dialling the telephone number.
Cancelling Camp On / Callback / Trunk Queuing
(When Camp On set)
<Camp On> Wait without
hanging up
Wait for the
<Callback>
system to call
you back
8 7 0
3
If your call doesn't go through...
Setting / Answering a Message Waiting Indication
Set
8
(Hear Busy Tone or No Answer)
Your phone's
Answer
MW Indicator 8
is flashing
When you set MW, the called party's MW Indicator starts to flash.
When you answer MW, the MW Indicator shall automatically go off when the called party answers.
Cancelling a Message Waiting Indication (at originating extension)
you want to cancel MW
8 7 1
Clearing All Message Waiting Indications (at any extension)
8 7 3
Clear all messages (you have left for other extensions and messages other extensions have left for you).
Answering Calls
Answering an Outside / Intercom Call
(Ringing)
Each type of incoming call can have its own distinctive ringing pattern. Ask you NEC Authorised Supplier
for details.
4 1
4 1
Extension Number
? ? ?
4